Resilient and Agile Engineering Solutions to Address Societal Challenges like Coronavirus Pandemic

Journal article


Goel, S., Hawi, S., Goel, G., Thakur, V.K., Pearce, O., Hoskins, C., Hussain, T., Agrawal, A., Upadhyaya, H., Cross, G. and Barber, A. (2020). Resilient and Agile Engineering Solutions to Address Societal Challenges like Coronavirus Pandemic. Materials Today Chemistry. https://doi.org/10.1016/j.mtchem.2020.100300
AuthorsGoel, S., Hawi, S., Goel, G., Thakur, V.K., Pearce, O., Hoskins, C., Hussain, T., Agrawal, A., Upadhyaya, H., Cross, G. and Barber, A.
Abstract

The world is witnessing tumultuous times as major economic powers including the US, UK, Russia, India, and most of Europe continue to be in a state of lockdown. The worst-hit sectors due to this lockdown are sales, production (manufacturing), transport (aerospace and automotive) and tourism. Lockdowns became necessary as a preventive measure to avoid the spread of the contagious and infectious “Coronavirus Disease 2019” (COVID-19). This newly identified disease is caused by a new strain of the virus being referred to as Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS CoV-2; formerly called 2019-nCoV). We review the current medical and manufacturing response to COVID-19, including advances in instrumentation, sensing, use of lasers, fumigation chambers and development of novel tools such as lab-on-the-chip using combinatorial additive and subtractive manufacturing techniques and use of molecular modelling and molecular docking in drug and vaccine discovery. We also offer perspectives on future considerations on climate change, outsourced versus indigenous manufacturing, automation, and antimicrobial resistance. Overall, this paper attempts to identify key areas where manufacturing can be employed to address societal challenges such as COVID-19

Keywordscoronavirus, manufactruring
Year2020
JournalMaterials Today Chemistry
PublisherElsevier
Digital Object Identifier (DOI)https://doi.org/10.1016/j.mtchem.2020.100300
Web address (URL)https://www.sciencedirect.com/science/article/pii/S2468519420300604?via%3Dihub
Publication dates
Print28 May 2020
Publication process dates
Accepted19 May 2020
Deposited26 May 2020
Accepted author manuscript
License
File Access Level
Open
Permalink -

https://openresearch.lsbu.ac.uk/item/89x1z

Download files


Accepted author manuscript
Accepted manuscript.pdf
License: CC BY-NC-ND 4.0
File access level: Open

  • 135
    total views
  • 2
    total downloads
  • 4
    views this month
  • 1
    downloads this month

Export as

Related outputs

Industry 4.0 and Digitalisation in Healthcare.
Popov, V., Kudryavtseva, E., Kumar, N., Shishkin, A., Stepanov, S. and Goel, S. (2022). Industry 4.0 and Digitalisation in Healthcare. Materials. 15 (6). https://doi.org/10.3390/ma15062140
Scanning Probe Lithography: State-of-the-Art and Future Perspectives
Fan, Pengfei, Gao, Jian, Mao, Hui, Geng, Y., Yan, Yongda, Wang, Yuzhang, Goel, S. and Luo, Xichun (2022). Scanning Probe Lithography: State-of-the-Art and Future Perspectives. Micromachines. 13 (2), p. e228. https://doi.org/10.3390/mi13020228
A bottom up mechanistic perspective on the nanostructured metallic electrocatalysts for Hydrogen Evolution Reactions (HER)
Verma, J. and Goel, S. (2022). A bottom up mechanistic perspective on the nanostructured metallic electrocatalysts for Hydrogen Evolution Reactions (HER). International Journal of Hydrogen Energy.
Modal analysis of novel coronavirus (SARS COV-2) using finite element methodology
Warsame, C., Valerini, D., Llavori, I., Barber, A. and Goel, S. (2022). Modal analysis of novel coronavirus (SARS COV-2) using finite element methodology. Journal of the Mechanical Behavior of Biomedical Materials. 135, p. 105406. https://doi.org/10.1016/j.jmbbm.2022.105406
Biomimetic generation of the strongest known biomaterial found in limpet tooth.
Rumney, R., Robson, S., Kao, A., Barbu, E., Bozycki, L., Smith, J., Cragg, S., Couceiro, F., Parwani, R., Tozzi, G., Stuer, M., Barber, Asa H, Ford, A. and Górecki, D. (2022). Biomimetic generation of the strongest known biomaterial found in limpet tooth. Nature Communications. 13 (1), p. 3753. https://doi.org/10.1038/s41467-022-31139-0
Implementing Supervised and Unsupervised Deep-Learning Methods to Predict Sputtering Plasma Features, a Step toward Digitizing Sputter Deposition of Thin Films
Salimian, A., Pardo Sanchez, C., Hasnath, M., Haine, E. and Upadhyaya, H. (2022). Implementing Supervised and Unsupervised Deep-Learning Methods to Predict Sputtering Plasma Features, a Step toward Digitizing Sputter Deposition of Thin Films. Coatings. 12 (7), p. 953. https://doi.org/10.3390/coatings12070953
Repurposing superhydrophobic surfaces into icephobic surfaces
Khaleque, T. and Goel, S. (2022). Repurposing superhydrophobic surfaces into icephobic surfaces. Materials Today: Proceedings. 64 (3), pp. 1526-1532. https://doi.org/10.1016/j.matpr.2022.05.585
Composite 3D printing of biomimetic human teeth
Barber, A. H., Cresswell-Boyes, A. J., Davies, G. R., Krishnamoorthy, M. and Mills, D. (2022). Composite 3D printing of biomimetic human teeth. Scientific Reports. 12 (7830), pp. 1-11. https://doi.org/10.1038/s41598-022-11658-y
Understanding the surface generation mechanism during microscratching of Ti-6Al-4V
Pratap, A., Divse, V., Goel, S. and Joshi, S.S (2022). Understanding the surface generation mechanism during microscratching of Ti-6Al-4V. Journal of Manufacturing Processes. 82, pp. 543-558. https://doi.org/10.1016/j.jmapro.2022.08.014
Correlating tool wear to intact carbon fibre contacts during drilling of Continuous Fibre Reinforced Polymers (CFRP)
McClelland, J., Murphy, A., Jin, Y. and Goel, S. (2022). Correlating tool wear to intact carbon fibre contacts during drilling of Continuous Fibre Reinforced Polymers (CFRP). Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.727
Designing porous electrode structures for supercapacitors using Quenched MD simulations
Khaitan, A., Owhal, A., Belgamwar, S.U., Mishra, R.R., Goel, S. and Roy, T. (2022). Designing porous electrode structures for supercapacitors using Quenched MD simulations. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.726
A critical review of the developments in molecular dynamics simulations to study femtosecond laser ablation
Pariz, I, Goel, S, Nguyen, D.J, Buckeridge, J and Zhou, X (2022). A critical review of the developments in molecular dynamics simulations to study femtosecond laser ablation. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.723
A short review of vapour droplet dispersion models used in CFD to study the airborne spread of COVID19.
Mehade Hussain, S., Goel, S., Kadapa, C. and Aristodemou, E. (2022). A short review of vapour droplet dispersion models used in CFD to study the airborne spread of COVID19. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.724
A hybrid Grey-TOPSIS based quantum behaved particle swarm optimization for selection of electrode material to machine Ti6Al4V by electro-discharge machining
Sahu, A.K., Mahapatra, S.S., Leite, M. and Goel, S. (2022). A hybrid Grey-TOPSIS based quantum behaved particle swarm optimization for selection of electrode material to machine Ti6Al4V by electro-discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering . 44 (188). https://doi.org/10.1007/s40430-022-03494-y
Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges
Faisal, N.H., Ahmed, R., Sellami, N., Prathuru, A., Njuguna, J., Venturi, F., Hussain, T., Nezhad, H.Y., Kumar, N., Goel, S., Upadhyaya, H., Joshi, S., Muhammad-Sukki, F., Prabhu, R., Mallick, T., Whittow, W. and Kamnis, S. (2022). Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges. Advanced Engineering Materials. https://doi.org/10.1002/adem.202200171
Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals
Mir, A., Luo, X., Llavori, I., Roy, A., Zlatanovic, D.L., Joshi, S.N. and Goel, S. (2022). Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals. Journal of the Mechanical Behavior of Biomedical Materials. 130, p. 105185. https://doi.org/10.1016/j.jmbbm.2022.105185
Prospects of MXenes in energy storage applications.
Lokhande, P E, Pakdel, A., Pathan, H M, Kumar, D., Vo, Dai-Viet N, Al-Gheethi, A., Sharma, A., Goel, S., Singh, P.P. and Lee, B-K. (2022). Prospects of MXenes in energy storage applications. Chemosphere. https://doi.org/10.1016/j.chemosphere.2022.134225
Artificial Neural Networks to Predict Sheet Resistance of Indium-Doped Zinc Oxide Thin Films Deposited via Plasma Deposition
Salimian, A., Aminishahsavarani, A. and Upadhyaya, H. (2022). Artificial Neural Networks to Predict Sheet Resistance of Indium-Doped Zinc Oxide Thin Films Deposited via Plasma Deposition. Coatings. 12 (2), p. 225. https://doi.org/10.3390/coatings12020225
Influence of Rotational Speed on the Electrical and Mechanical Properties of the Friction Stir Spot Welded Aluminium Alloy Sheets
Zlatanovic, D.L., Bergmann, J.P., Balos, S., Gräzel, M., Pejic, D., Sovilj, P. and Goel, S. (2022). Influence of Rotational Speed on the Electrical and Mechanical Properties of the Friction Stir Spot Welded Aluminium Alloy Sheets. Welding in the world. https://doi.org/10.1007/s40194-022-01267-8
A method for non-destructive determination of cocoa bean fermentation levels based on Terahertz hyperspectral imaging
Nguyen, D., Pissard, A., Fernandez Pierna, J.A., Rogez, H., Souza, J., Dortu, F., Goel, S., Hernandez, Y. and Baeten, V. (2022). A method for non-destructive determination of cocoa bean fermentation levels based on Terahertz hyperspectral imaging. International Journal of Food Microbiology. 365 (109537). https://doi.org/10.1016/j.ijfoodmicro.2022.109537
Thermal response of multi-layer UV crosslinked PEGDA hydrogels
Khalili, M. H., Afsar, A., Zhang, R., Wilson, S., Dossi, E., Goel, S., Impey, S. A. and Aria, A. I. (2022). Thermal response of multi-layer UV crosslinked PEGDA hydrogels. Polymer Degradation and Stability. 195, p. 109805. https://doi.org/10.1016/j.polymdegradstab.2021.109805
Nanomaterials based Biosensing: Methods and principle of detection
Kumar, N., Goel, G. and Goel, S. (2022). Nanomaterials based Biosensing: Methods and principle of detection. in: Joshi SN and Chandra P (ed.) Advanced Micro and Nano Manufacturing Technologies - Applications in Biochemical and Biomedical Engineering Springer Nature.
Critical Review of Nanopillar-Based Mechanobactericidal Systems
Hawi, Sara, Goel, S., Kumar, V., Pearce, Oliver, Ayre, Wayne Nishio and Ivanova, E. (2022). Critical Review of Nanopillar-Based Mechanobactericidal Systems. ACS Applied Nano Materials. 5 (1), pp. 1-17. https://doi.org/10.1021/acsanm.1c03045
Clay Swelling: Role of Cations in Stabilizing/Destabilizing Mechanisms.
Chen, W., Grabowski, Robert C and Goel, S. (2022). Clay Swelling: Role of Cations in Stabilizing/Destabilizing Mechanisms. ACS Omega. 7 (4), pp. 3185-3191. https://doi.org/10.1021/acsomega.1c04384
Influence of Tool Geometry and Process Parameters on the Properties of Friction Stir Spot Welded Multiple (AA 5754 H111) Aluminium Sheets.
Labus Zlatanovic, D., Balos, S., Bergmann, J., Rasche, Stefan, Pecanac, M. and Goel, S. (2021). Influence of Tool Geometry and Process Parameters on the Properties of Friction Stir Spot Welded Multiple (AA 5754 H111) Aluminium Sheets. Materials. 14 (5). https://doi.org/ma14051157
Towards Next-Generation Sustainable Composites Made of Recycled Rubber, Cenospheres, and Biobinder.
Irtiseva, Kristine, Lapkovskis, V., Mironovs, Viktors, Ozolins, Jurijs, Thakur, V., Goel, G., Baronins, J. and Shishkin, A. (2021). Towards Next-Generation Sustainable Composites Made of Recycled Rubber, Cenospheres, and Biobinder. Polymers. 13 (4). https://doi.org/polym13040574
Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review.
Popov, V., Grilli, M., Koptyug, A., Jaworska, L., Katz-Demyanetz, A., Klobčar, D., Balos, S., Postolnyi, B. and Goel, S. (2021). Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review. Materials. 14 (4). https://doi.org/ma14040909
Solutions of Critical Raw Materials Issues Regarding Iron-Based Alloys.
Novák, P., Belezze, T., Cabibbo, M., Gamsjäger, Ernst, Wiessner, Manfred, Rajnovic, D., Jaworska, L., Hanus, P., Shishkin, A., Goel, G. and Goel, Saurav (2021). Solutions of Critical Raw Materials Issues Regarding Iron-Based Alloys. Materials. 14 (4). https://doi.org/ma14040899
Development of carbonaceous tin-based solder composite achieving unprecedented joint performance
Hawi, S., Gharavian, S., Burda, M., Goel, S., Lotfian, S., Khaleque, T. and Yazdani Nezhad, H. (2021). Development of carbonaceous tin-based solder composite achieving unprecedented joint performance . Emergent materials. 4, pp. 1679-1696. https://doi.org/10.1007/s42247-021-00337-9
Experimental investigation on microwave sintered composite tool for electro-discharge machining of Titanium alloy
Sahu, A.K., Mahapatra, S.S., Bhoi, N.K., Singh, H., Leite, M. and Goel, S. (2021). Experimental investigation on microwave sintered composite tool for electro-discharge machining of Titanium alloy. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-021-06546-x
Nanofabrication route to achieve sustainable production of next generation defect-free graphene: analysis and characterisation
Misra, S., Katiyar, N.K., Kumar, A., Goel, S. and Biswas, K. (2021). Nanofabrication route to achieve sustainable production of next generation defect-free graphene: analysis and characterisation. Nanofabrication. 6 (1), pp. 36-43. https://doi.org/10.1515/nanofab-2020-0101
Fabrication of three-dimensional sin-shaped ripples using a multi-tip diamond tool based on the force modulation approach
Wang, Y., Fan, P., Luo, X., Geng, Y., Goel, S., Wu, W., Li, G. and Yan, Y. (2021). Fabrication of three-dimensional sin-shaped ripples using a multi-tip diamond tool based on the force modulation approach. Journal of Manufacturing Processes. 72, p. 262. https://doi.org/10.1016/j.jmapro.2021.10.032
Computational prediction of electrical and thermal properties of graphene and BaTiO3 reinforced epoxy nanocomposites
Mishra, R.K., Goel, S. and Nezhad, H.Y. (2021). Computational prediction of electrical and thermal properties of graphene and BaTiO3 reinforced epoxy nanocomposites. Biomaterials and Polymers Horizons. 1 (1), pp. 1-14.
Role of Thermal Spray in Combating Climate Change
Viswanathan, V., Kumar, N., Goel, G., Matthews, A. and Goel, S. (2021). Role of Thermal Spray in Combating Climate Change. Emergent Materials. https://doi.org/10.1007/s42247-021-00307-1
A review on biomass-derived materials and their applications as corrosion inhibitors, catalysts, food and drug delivery agents
Yadav, M., Goel, G., Hatton, F. L., Bhagat, M., Kumar Mehta, S., Kumar Mishra, R. and Bhojak, N. (2021). A review on biomass-derived materials and their applications as corrosion inhibitors, catalysts, food and drug delivery agents. Current Research in Green and Sustainable Chemistry. https://doi.org/10.1016/j.crgsc.2021.100153
A Bibliometric Study on Biomimetic and Bioinspired Membranes for Water Filtration
Goel, G., Hélix-Nielsen, C., Upadhyaya, H. M. and Goel, S. (2021). A Bibliometric Study on Biomimetic and Bioinspired Membranes for Water Filtration . npj Clean Water. https://doi.org/10.1038/s41545-021-00131-4
High yield recovery of 2,3-butanediol from fermented broth accumulated on xylose rich sugarcane bagasse hydrolysate using aqueous two-phase extraction system
Narisetty, V., Amraoui, Y., Abdullah, A., Ahmad, E., Agrawal, D., Parameswaran, B., Pandey, A., Goel, S. and Kumar, V. (2021). High yield recovery of 2,3-butanediol from fermented broth accumulated on xylose rich sugarcane bagasse hydrolysate using aqueous two-phase extraction system. Bioresource Technology. 337, p. 125463. https://doi.org/10.1016/j.biortech.2021.125463
An analytical model to predict the depth of sub-surface damage for grinding of brittle materials
Yin, J., Bai, Q., Goel, S., Zhou, P. and Zhang, B. (2021). An analytical model to predict the depth of sub-surface damage for grinding of brittle materials. CIRP Journal of Manufacturing Science and Technology . 33, pp. 454-464. https://doi.org/10.1016/j.cirpj.2021.03.019
Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation
Faisal, N.H., Sellami, N., Venturi, F., Hussain, T., Mallick, T., Muhammad-Sukki, F., Bishop, A., Upadhyaya, H., Kumar, N. and Goel, S. (2021). Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. Emergent Materials. https://doi.org/10.1007/s42247-021-00252-z
X-ray computed tomography evaluations of additive manufactured multimaterial composites.
Curto, M., Kao, A P, Keeble, W, Tozzi, G. and Barber, A H (2021). X-ray computed tomography evaluations of additive manufactured multimaterial composites. Journal of Microscopy. https://doi.org/10.1111/jmi.13034
Nature inspired materials: Emerging trends and prospects
Kumar, N., Goel, G., Hawi, S. and Goel, S. (2021). Nature inspired materials: Emerging trends and prospects . NPG Asia Materials. 15 (56). https://doi.org/10.1038/s41427-021-00322-y
Emergence of machine learning in the development of high entropy alloy and their prospects in advanced engineering applications
Kumar, N., Goel, G. and Goel, S. (2021). Emergence of machine learning in the development of high entropy alloy and their prospects in advanced engineering applications. Emergent Materials. https://doi.org/10.1007/s42247-021-00249-8
Atomic scale friction studies on single crystal GaAs using AFM and molecular dynamics simulation
Fan, P., Goel, S., Luo, X. and Upadhyaya, H. (2021). Atomic scale friction studies on single crystal GaAs using AFM and molecular dynamics simulation. Nanomanufacturing and Metrology. https://doi.org/10.1007/s41871-021-00109-3
Molecular dynamics simulation of AFM tip-based hot scratching of nanocrystalline GaAs
Fan, P., Goel, S., Luo, X., Yan, Y., Geng, Y., He, Y. and Wang, Y. (2021). Molecular dynamics simulation of AFM tip-based hot scratching of nanocrystalline GaAs. Materials Science in Semiconductor Processing. 130, p. 105832. https://doi.org/10.1016/j.mssp.2021.105832
Origins of ductile plasticity in a polycrystalline gallium arsenide during scratching: MD simulation study
Fan, P., Goel, S., Luo, X., Yan, Y., Geng, Y. and He, Y. (2021). Origins of ductile plasticity in a polycrystalline gallium arsenide during scratching: MD simulation study. Applied Surface Science. 552, p. 149489. https://doi.org/10.1016/j.apsusc.2021.149489
In-depth microscopic characterisation of the weld faying interface revealing stress-induced metallurgical transformations during friction stir spot welding
Zlatanovi, D. L., Balos, S., Bergmann, J. P., Rasche, S., Zavašnik, J., Panchal, V., Sidjanin, L. and Goel, S. (2021). In-depth microscopic characterisation of the weld faying interface revealing stress-induced metallurgical transformations during friction stir spot welding. International Journal of Machine Tools and Manufacture. 164, p. 103716.
Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting.
Popov, V., Fleisher, A., Muller-Kamskii, G., Shishkin, A., Katz-Demyanetz, A., Travitzky, N. and Goel, S. (2021). Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting. Scientific Reports. 11 (1), p. 2438. https://doi.org/10.1038/s41598-021-81861-w
Hypothesis on the Influence of the Magnetic Behaviour of Hydrogen Doped Zinc Oxide during Its Plasma Sputtering Process
Salimian, A., Hasnath, A., Aminishahsavarani, A. and Upadhyaya, H. (2021). Hypothesis on the Influence of the Magnetic Behaviour of Hydrogen Doped Zinc Oxide during Its Plasma Sputtering Process. Coatings. 11 (2), p. e222. https://doi.org/10.3390/coatings11020222
Using circular economy principles to recycle materials in guiding the design of a wet scrubber-reactor for indoor air disinfection from coronavirus and other pathogens.
Shishkin, A., Goel, G., Baronins, J., Ozolins, J., Hoskins, C. and Goel, S. (2021). Using circular economy principles to recycle materials in guiding the design of a wet scrubber-reactor for indoor air disinfection from coronavirus and other pathogens. Environmental technology & innovation. 22, p. 101429. https://doi.org/10.1016/j.eti.2021.101429
Potential pathway for recycling of the paper mill sludge compost for brick making
Goel, G. (2021). Potential pathway for recycling of the paper mill sludge compost for brick making. London South Bank University. https://doi.org/10.18744/lsbu.8vz35
Potential pathway for recycling of the paper mill sludge compost for brick making
Goel, G., Vasić, M.V., Kumar, N., Subramanian Kala, K., Pezo, M. and Dinakar, P. (2021). Potential pathway for recycling of the paper mill sludge compost for brick making. Construction and Building Materials. 278. https://doi.org/10.1016/j.conbuildmat.2021.122384
Recycling of waste coal dust for the energy-efficient fabrication of bricks: A laboratory to industrial-scale study
Vasić, M.V., Goel, G., Vasić, M. and Radojević, Z. (2021). Recycling of waste coal dust for the energy-efficient fabrication of bricks: A laboratory to industrial-scale study. Environmental Technology and Innovation. 21. https://doi.org/10.1016/j.eti.2020.101350
Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle
Larrañaga-Altuna, M., Zabala, A., Llavori, I., Pearce, O., Nguyen, D., Caro, J., Mescheder, Holger, Endrino, J., Goel, G., Ayre, W., Seenivasagam, R., Tripathy, D., Armstrong, Joe and Goel, S. (2021). Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle. Applied Physics Reviews. 8 (2), p. 021303. https://doi.org/10.1063/5.0028844
The importance of wavelength for tight temperature control during μ-laser-assisted machining
Dennis, Ashley, Goel, S., Al-Sayegh, Rajab and O’Neill, William (2020). The importance of wavelength for tight temperature control during μ-laser-assisted machining. Journal of Micromanufacturing. 4 (1), pp. 93-98. https://doi.org/10.1177/2516598420917866
An atomistic investigation on the wear of diamond during atomic force microscope tip-based nanomachining of Gallium Arsenide
Fan, P., Goel, S., Luo, X., Yan, Y., Geng, Y. and Wang, Y. (2020). An atomistic investigation on the wear of diamond during atomic force microscope tip-based nanomachining of Gallium Arsenide. Computational Materials Science. 187, p. 110115. https://doi.org/10.1016/j.commatsci.2020.110115
New insights into the methods for predicting ground surface roughness in the age of digitalisation
Yuhang, P., Ping, Z., Ying, Y., Anupam, A., Yonghao, W., Dongming, G. and Goel, S. (2020). New insights into the methods for predicting ground surface roughness in the age of digitalisation. Precision Engineering. 67, pp. 393-418. https://doi.org/10.1016/j.precisioneng.2020.11.001
Bio-based sustainable aerogels: New sensation in CO2 capture
Verma, A., Thakur, S., Goel, G., Robert, D., Matharu, A.V. and Thakur, V.K. (2020). Bio-based sustainable aerogels: New sensation in CO2 capture. Current Research in Green and Sustainable Chemistry. 3, p. 100027. https://doi.org/10.1016/j.crgsc.2020.100027
Influence of waste glass in the foaming process of open cell porous ceramic as filtration media for industrial wastewater
Shishkin, A., Aguedal, H., Goel, G., Peculevica, J., Newport, D. and Ozolins, J. (2020). Influence of waste glass in the foaming process of open cell porous ceramic as filtration media for industrial wastewater. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.124546
Horizons of modern molecular dynamics simulation in digitalised solid freeform fabrication with advanced materials
Goel, S., Knaggs, M., Goel, G., Zhou, X. W., Upadhyaya, H.M., Thakur, V. F., Kumar, V., Bizarri, G., Tiwari, A., Murphy, A., Stukowskii, A. and Matthewsj, A. (2020). Horizons of modern molecular dynamics simulation in digitalised solid freeform fabrication with advanced materials. Materials Today Chemistry. 18, p. 100356. https://doi.org/10.1016/j.mtchem.2020.100356
Phase evolution, morphological, optical and electrical properties of femtosecond pulsed laser deposited TiO2 thin films
Kumi-Barimah, E, Penhale-Jones, R, Salimian, A, Upadhyaya, H, Hasnath, A and Jose, G (2020). Phase evolution, morphological, optical and electrical properties of femtosecond pulsed laser deposited TiO2 thin films. Scientific Reports. 10 (1). https://doi.org/10.1038/s41598-020-67367-x
Surface Defect incorporated Diamond Machining of Silicon
Khatri, N., Barkachary, B.M., Muneeswaran, B/, Al-Sayegh, R., Luo, X. and Goel, S. (2020). Surface Defect incorporated Diamond Machining of Silicon. Int J of Extreme Manufacturing. 2 (4). https://doi.org/10.1088/2631-7990/abab4a
Distribution of shallow NV centers in diamond revealed by photoluminescence spectroscopy and nanomachining
Jadidi, M.F., Ozer, H.O., Goel, S, Kilpatrick, J.I., McEvoy, N., McCloskey, D., Donegan, J.F. and Cross, G.L.W. (2020). Distribution of shallow NV centers in diamond revealed by photoluminescence spectroscopy and nanomachining. Carbon. 167, pp. 114-121. https://doi.org/10.1016/j.carbon.2020.04.086
Elastic recovery of monocrystalline silicon during ultra-fine rotational grinding
Huang, N., Yan, Y., Zhou, P., Kang, R., Guo, D. and Goel, S. (2020). Elastic recovery of monocrystalline silicon during ultra-fine rotational grinding. Precision Engineering. 65, pp. 64-71. https://doi.org/10.1016/j.precisioneng.2020.05.004
Synthesis of SnSe quantum dots by successive ionic layer adsorption and reaction (SILAR) method for efficient solar cells applications
Kishore Kumar, D, Loskot, J, Kříž, J, Bennett, N, Upadhyaya, HM, Sadhu, V, Venkata Reddy, C and Reddy, KR (2020). Synthesis of SnSe quantum dots by successive ionic layer adsorption and reaction (SILAR) method for efficient solar cells applications. Solar Energy. 199, pp. 570-574. https://doi.org/10.1016/j.solener.2020.02.050
Highly Conductive Zinc Oxide Based Transparent Conductive Oxide Films Prepared using RF Plasma Sputtering Under Reducing Atmosphere
Salimian, A., Upadhyaya, H., Hasnath, A., Aminishahsavarani, A., Pardo Sanchez, C., Anguilano, L., Uchechukwu O. and Sanchez, C (2020). Highly Conductive Zinc Oxide Based Transparent Conductive Oxide Films Prepared using RF Plasma Sputtering Under Reducing Atmosphere. Coatings. 10 (5), p. 472. https://doi.org/10.3390/coatings10050472
The Critical Raw Materials in Cutting Tools for Machining Applications: A Review
Goel, S. (2020). The Critical Raw Materials in Cutting Tools for Machining Applications: A Review. Materials MDPI. 13 (1377). https://doi.org/10.3390/ma13061377
An experimental study on lap joining of multiple sheets of aluminium alloy (AA 5754) using friction stir spot welding
Goel, S., Zlatanovic DL and Balos S (2020). An experimental study on lap joining of multiple sheets of aluminium alloy (AA 5754) using friction stir spot welding. International Journal of Advanced Manufacturing Technology. 107, pp. 3093-3107. https://doi.org/10.1007/s00170-020-05214-z
Towards an improved understanding of plasticity, friction and wear mechanisms in precipitate containing AZ91 Mg alloy
Kumar D, Goel, S., Gosvami N and Jain J (2020). Towards an improved understanding of plasticity, friction and wear mechanisms in precipitate containing AZ91 Mg alloy. Materialia. 10, p. 100640. https://doi.org/10.1016/j.mtla.2020.100640
Functional evaluation and testing of a newly developed Teleost’s Fish Otolith derived biocomposite coating for healthcare
Goel, S, Montanez, N. D., Carreno, H., Escobar, P., Estupinan, H. A., Pena, D. Y. and Endrino, J. L. (2020). Functional evaluation and testing of a newly developed Teleost’s Fish Otolith derived biocomposite coating for healthcare. Scientific Reports. 10 (1), pp. 1-16. https://doi.org/10.1038/s41598-019-57128-w
Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems
Daminabo, S. C., Goel, S, Grammatikos, S. A., Nezhad, H. Y. and Thakur, V. K. (2020). Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Materials Today Chemistry. 16, p. 100248. https://doi.org/10.1016/j.mtchem.2020.100248
On the Use of the Theory of Critical Distances with Mesh Control for Fretting Fatigue Lifetime Assessment
Zabala, A., Infante-Garcia, Giner, E., Goel, S., Endrino, J.L. and Llavori, I. (2020). On the Use of the Theory of Critical Distances with Mesh Control for Fretting Fatigue Lifetime Assessment . Tribology International. 142, p. 105985. https://doi.org/https://doi.org/10.1016/j.triboint.2019.105985
Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V
Liu C, Goel S, Llavori I, Stolf P, Giusca CL, Zabala A, Kohlscheen J, Paiva JM, Endrino JL and Veldhuis SC Fox Rabinovich GS (2019). Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V. Journal of the Mechanical Behavior of Biomedical Materials. 97, pp. 126-137. https://doi.org/10.1016/j.jmbbm.2019.05.013
Full-Field Strain Analysis of Bone–Biomaterial Systems Produced by the Implantation of Osteoregenerative Biomaterials in an Ovine Model
Peña Fernández, M., Dall’Ara, Enrico, Bodey, Andrew J., Parwani, Rachna, Barber, A., Blunn, Gordon W. and Tozzi, G. (2019). Full-Field Strain Analysis of Bone–Biomaterial Systems Produced by the Implantation of Osteoregenerative Biomaterials in an Ovine Model. ACS Biomaterials Science & Engineering. 5 (5), pp. 2543-2554. https://doi.org/10.1021/acsbiomaterials.8b01044
Seismo‐Mechanical Response of Anisotropic Rocks Under Hydraulic Fracture Conditions: New Experimental Insights
Gehne, S., Benson, P., Koor, N., Dobson, K., Enfield, M. and Barber, A. (2019). Seismo‐Mechanical Response of Anisotropic Rocks Under Hydraulic Fracture Conditions: New Experimental Insights. Journal of Geophysical Research: Solid Earth. 124 (9), pp. 9562-9579. https://doi.org/10.1029/2019jb017342
Optical analysis of RF sputtering plasma through colour characterization
Salimian, A., Haghpanahan, R., Hasnath, A. and Upadhyaya, H. (2019). Optical analysis of RF sputtering plasma through colour characterization. Coatings. 9 (5), pp. 315-315. https://doi.org/10.3390/coatings9050315
Ambient stable, hydrophobic, electrically conductive porphyrin hole-extracting materials for printable perovskite solar cells
Reddy, G., Katakam, R., Devulapally, K., Jones, L.A., Della Gaspera, E., Upadhyaya, H.M., Islavath, N. and Giribabu, L. (2019). Ambient stable, hydrophobic, electrically conductive porphyrin hole-extracting materials for printable perovskite solar cells. Journal of Materials Chemistry C. 7 (16), pp. 4702-4708. https://doi.org/10.1039/c9tc00605b
Optimizing room temperature binder free TiO2 paste for high efficiency flexible polymer dye sensitized solar cells
Kishore Kumar, D, Hsu, MH, Ivaturi, A, Chen, B, Bennett, N and Upadhyaya, HM (2019). Optimizing room temperature binder free TiO2 paste for high efficiency flexible polymer dye sensitized solar cells. Flexible and Printed Electronics. 4 (1), pp. 015007-015007. https://doi.org/10.1088/2058-8585/ab02c4
Low-temperature titania-graphene quantum dots paste for flexible dye-sensitised solar cell applications
Kumar, DK, Suazo-Davila, D, García-Torres, D, Cook, NP, Ivaturi, A, Hsu, MH, Martí, AA, Cabrera, CR, Chen, B, Bennett, N and Upadhyaya, HM (2019). Low-temperature titania-graphene quantum dots paste for flexible dye-sensitised solar cell applications. Electrochimica Acta. 305, pp. 278-284. https://doi.org/10.1016/j.electacta.2019.03.040
Scalable screen-printing manufacturing process for graphene oxide platinum free alternative counter electrodes in efficient dye sensitized solar cells
Kumar, DK, Swami, SK, Dutta, V, Chen, B, Bennett, N and Upadhyaya, HM (2019). Scalable screen-printing manufacturing process for graphene oxide platinum free alternative counter electrodes in efficient dye sensitized solar cells. FlatChem. 15, pp. 100105-100105. https://doi.org/10.1016/j.flatc.2019.100105
Screen printed tin selenide films used as the counter electrodes in dye sensitized solar cells
Kishore Kumar, D, Popuri, SR, Swami, SK, Onuoha, OR, Bos, JW, Chen, B, Bennett, N and Upadhyaya, HM (2019). Screen printed tin selenide films used as the counter electrodes in dye sensitized solar cells. Solar Energy. 190, pp. 28-33. https://doi.org/10.1016/j.solener.2019.07.066
Fabrication of functionalised surfaces on Gum metal (Ti-30Nb) using micromachining
Hawi, S., Dickins, A., Pardal, G.R., Giusca, C., Pearce, O. and Goel, S. (2019). Fabrication of functionalised surfaces on Gum metal (Ti-30Nb) using micromachining . euspen’s 19th International Conference & Exhibition, Bilbao, ES, June 2019. Bilbao 03 - 07 Jun 2019 EUSPEN.
Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding
Balos, S., Dramicanin, M., Janjatovic, P., Zabunov, I., Pilic, B., Goel, S. and Szutkowska, M. (2019). Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding. Metals. 9 (11), p. 1187. https://doi.org/https://doi.org/10.3390/met9111187
The role of high-pressure coolant in the wear characteristics of WC-Co tools during the cutting of Ti–6Al–4V
Stolf, P., Paiva, J.M., Ahmed, Y.S., Endrina, J.L., Goel, S. and Veldhuis, S.C. (2019). The role of high-pressure coolant in the wear characteristics of WC-Co tools during the cutting of Ti–6Al–4V. Wear. 440-441, p. 203090. https://doi.org/10.1016/j.wear.2019.203090
Structural orientation dependent sub-lamellar bone mechanics
Jimenez-Palomar, I, Shipov, A, Shahar, R and Barber, AH (2015). Structural orientation dependent sub-lamellar bone mechanics. Journal of the Mechanical Behavior of Biomedical Materials. 52, pp. 63-71. https://doi.org/10.1016/j.jmbbm.2015.02.031
Microscopy and supporting data for osteoblast integration within an electrospun fibrous network
Stachewicz, U, Qiao, T, Rawlinson, SCF, Veiga Almeida, F, Li, W-Q, Cattell, M and Barber, AH (2015). Microscopy and supporting data for osteoblast integration within an electrospun fibrous network. Data in Brief. 5, pp. 775-781. https://doi.org/10.1016/j.dib.2015.10.009
3D imaging of cell interactions with electrospun PLGA nanofiber membranes for bone regeneration
Stachewicz, U, Qiao, T, Rawlinson, SCF, Almeida, FV, Li, W-Q, Cattell, M and Barber, AH (2015). 3D imaging of cell interactions with electrospun PLGA nanofiber membranes for bone regeneration. Acta Biomaterialia. 27, pp. 88-100. https://doi.org/10.1016/j.actbio.2015.09.003
The cytolinker plectin regulates nuclear mechanotransduction in keratinocytes
Almeida, FV, Walko, G, McMillan, JR, McGrath, JA, Wiche, G, Barber, AH and Connelly, JT (2015). The cytolinker plectin regulates nuclear mechanotransduction in keratinocytes. Journal of Cell Science. 128 (24), pp. 4475-4486. https://doi.org/10.1242/jcs.173435
3D nanomechanical evaluations of dermal structures in skin
Kao, AP, Connelly, JT and Barber, AH (2015). 3D nanomechanical evaluations of dermal structures in skin. Journal of the Mechanical Behavior of Biomedical Materials. 57, pp. 14-23. https://doi.org/10.1016/j.jmbbm.2015.11.017
Nanointerfacial strength between non-collagenous protein and collagen fibrils in antler bone
Hang, F, Gupta, HS and Barber, AH (2013). Nanointerfacial strength between non-collagenous protein and collagen fibrils in antler bone. Journal of The Royal Society Interface. 11 (92), pp. 20130993-20130993. https://doi.org/10.1098/rsif.2013.0993
Adhesion Anisotropy between Contacting Electrospun Fibers
Stachewicz, U, Hang, F and Barber, AH (2014). Adhesion Anisotropy between Contacting Electrospun Fibers. Langmuir. 30 (23), pp. 6819-6825. https://doi.org/10.1021/la5004337
Polarised infrared microspectroscopy of edge-oriented graphene oxide papers
Frogley, MD, Wang, C, Cinque, G and Barber, AH (2014). Polarised infrared microspectroscopy of edge-oriented graphene oxide papers. Vibrational Spectroscopy. 75, pp. 178-183. https://doi.org/10.1016/j.vibspec.2014.07.005
Molecular force transfer mechanisms in graphene oxide paper evaluated using atomic force microscopy and in situ synchrotron micro FT-IR spectroscopy
Wang, C, Frogley, MD, Cinque, G, Liu, L-Q and Barber, AH (2014). Molecular force transfer mechanisms in graphene oxide paper evaluated using atomic force microscopy and in situ synchrotron micro FT-IR spectroscopy. Nanoscale. 6 (23), pp. 14404-14411. https://doi.org/10.1039/C4NR03646H
Mechanical Behavior of Osteoporotic Bone at Sub-Lamellar Length Scales
Jimenez-Palomar, I, Shipov, A, Shahar, R and Barber, AH (2015). Mechanical Behavior of Osteoporotic Bone at Sub-Lamellar Length Scales. Frontiers in Materials. 2. https://doi.org/10.3389/fmats.2015.00009
Extreme strength observed in limpet teeth
Barber, AH, Lu, D and Pugno, NM (2015). Extreme strength observed in limpet teeth. Journal of The Royal Society Interface. 12 (105), pp. 20141326-20141326. https://doi.org/10.1098/rsif.2014.1326
Wetting Hierarchy in Oleophobic 3D Electrospun Nanofiber Networks
Stachewicz, U, Bailey, RJ, Zhang, H, Stone, CA, Willis, CR and Barber, AH (2015). Wetting Hierarchy in Oleophobic 3D Electrospun Nanofiber Networks. ACS applied materials & interfaces. 7 (30), pp. 16645-16652. https://doi.org/10.1021/acsami.5b04272
Molecular dynamics simulation of the elliptical vibration assisted machining (EVAM) of pure iron
Goel S, Martinez FD, Chavoshi SZ, Khatri N and Giusca C (2018). Molecular dynamics simulation of the elliptical vibration assisted machining (EVAM) of pure iron. Journal of Micromanufacturing. 1 (1), pp. 6-19. https://doi.org/10.1177/2516598418765359
The possibility of performing FEA analysis of a contact loading process fed by the MD simulation data
Goel S, Iñigo Llavori AZ, Giusca C, Veldhuis SC and Endrino JL (2018). The possibility of performing FEA analysis of a contact loading process fed by the MD simulation data. International Journal of Machine Tools and Manufacture. 134, pp. 79-80. https://doi.org/10.1016/j.ijmachtools.2018.07.003
Incipient plasticity in tungsten during nanoindentation: Dependence on surface roughness, probe radius and crystal orientation
Beake B and Goel, S. (2018). Incipient plasticity in tungsten during nanoindentation: Dependence on surface roughness, probe radius and crystal orientation. International Journal of Refractory Metals and Hard Materials. 75, pp. 63-69. https://doi.org/https://doi.org/10.1016/j.ijrmhm.2018.03.020
Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten
Goel, S., Cross, G., Stukowski, A., Gamsjager, E., Beake, B. and Agrawal, A. (2018). Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten. Computational Materials Science. 152, pp. 196-210. https://doi.org/https://doi.org/10.1016/j.commatsci.2018.04.044
Hydration dependent mechanical performance of denture adhesive hydrogels
Zhang, F, An, Y, Roohpour, N, Barber, AH and Gautrot, JE (2018). Hydration dependent mechanical performance of denture adhesive hydrogels. Dental Materials. 34 (10), pp. 1440-1448. https://doi.org/10.1016/j.dental.2018.06.015
Approaches to 3D printing teeth from X-ray microtomography.
Cresswell-Boyes, AJ, Barber, AH, Mills, D, Tatla, A and Davis, GR (2018). Approaches to 3D printing teeth from X-ray microtomography. Journal of Microscopy. 272 (3), pp. 207-212. https://doi.org/10.1111/jmi.12725
Optimization of digital volume correlation computation in SR-microCT images of trabecular bone and bone-biomaterial systems.
Peña Fernández, M, Barber, AH, Blunn, GW and Tozzi, G (2018). Optimization of digital volume correlation computation in SR-microCT images of trabecular bone and bone-biomaterial systems. Journal of Microscopy. 272 (3), pp. 213-272. https://doi.org/10.1111/jmi.12745
Development of sustainable biodegradable lignocellulosic hemp fiber/ polycaprolactone biocomposites for light weight applications
Barber, AH, Dhakal, HN, Ismail, S, Zhang, Z, Welsh, E, Maigret, J-E and Beaugrand, J (2018). Development of sustainable biodegradable lignocellulosic hemp fiber/ polycaprolactone biocomposites for light weight applications. Composites Part A: Applied Science and Manufacturing. 113, pp. 350-358. https://doi.org/10.1016/j.compositesa.2018.08.005
Preservation of bone tissue integrity with temperature control for in situ SR-MicroCT experiments
Fernández, MP, Dall'Ara, E, Kao, AP, Bodey, AJ, Karali, A, Blunn, GW, Barber, AH and Tozzi, G (2018). Preservation of bone tissue integrity with temperature control for in situ SR-MicroCT experiments. Materials. 11 (11). https://doi.org/10.3390/ma11112155
Effect of SR-microCT radiation on the mechanical integrity of trabecular bone using in situ mechanical testing and digital volume correlation
Peña Fernández, M, Cipiccia, S, Dall'Ara, E, Bodey, AJ, Parwani, R, Pani, M, Blunn, GW, Barber, AH and Tozzi, G (2018). Effect of SR-microCT radiation on the mechanical integrity of trabecular bone using in situ mechanical testing and digital volume correlation. Journal of the Mechanical Behavior of Biomedical Materials. 88, pp. 109-119. https://doi.org/10.1016/j.jmbbm.2018.08.012
Current trends and future of sequential micro-machining processes on a single machine tool
Chavoshi, S.Z., Goel, S. and Morantz, P. (2017). Current trends and future of sequential micro-machining processes on a single machine tool. Materials & Design. 127, pp. 37-53. https://doi.org/10.1016/j.matdes.2017.04.057
Cyclic nanoindentation and nano-impact fatigue mechanisms of functionally graded TiN/TiNi film
Faisal NH, Prathuru AK, Goel S, Ahmed R, Droubi MG, Beake BD and Fu YQ (2017). Cyclic nanoindentation and nano-impact fatigue mechanisms of functionally graded TiN/TiNi film. Shape Memory and Superelasticity. 3, pp. 149-167. https://doi.org/10.1007/s40830-017-0099-y
Addressing the discrepancy of finding equilibrium melting point of silicon using MD simulations
Chavoshi SZ, Xu S and Goel S (2017). Addressing the discrepancy of finding equilibrium melting point of silicon using MD simulations. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. https://doi.org/10.1098/rspa.2017.0084
Micro-mechanical properties of the tendon-to-bone attachment
Deymier, AC, An, Y, Boyle, JJ, Schwartz, AG, Birman, V, Genin, GM, Thomopoulos, S and Barber, AH (2017). Micro-mechanical properties of the tendon-to-bone attachment. Acta Biomaterialia. 56, pp. 25-35. https://doi.org/10.1016/j.actbio.2017.01.037
Surface free energy analysis of electrospun fibers based on Rayleigh-Plateau/Weber instabilities
Stachewicz, U, Dijksman, JF, Soudani, C, Tunnicliffe, LB, Busfield, JJC and Barber, AH (2017). Surface free energy analysis of electrospun fibers based on Rayleigh-Plateau/Weber instabilities. European Polymer Journal. 91, pp. 368-375. https://doi.org/10.1016/j.eurpolymj.2017.04.017
Extreme Toughness Exhibited in Electrospun Polystyrene Fibers
Zhang, F and Barber, AH (2017). Extreme Toughness Exhibited in Electrospun Polystyrene Fibers. Macromolecular Materials and Engineering. 302 (9), pp. 1700084-1700084. https://doi.org/10.1002/mame.201700084
X-ray Imaging of Transplanar Liquid Transport Mechanisms in Single Layer Textiles
Zhang, G, Parwani, R, Stone, CA, Barber, AH and Botto, L (2017). X-ray Imaging of Transplanar Liquid Transport Mechanisms in Single Layer Textiles. Langmuir. 33 (43), pp. 12072-12079. https://doi.org/10.1021/acs.langmuir.7b02982
Stress concentrations in nanoscale defective graphene
Wang, C, Wang, J and Barber, AH (2017). Stress concentrations in nanoscale defective graphene. AIP Advances. 7 (11), pp. 115001-115001. https://doi.org/10.1063/1.4996387
Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: A molecular dynamics simulation investigation
Chavoshi, S.Z., Goel, S. and Luo, X. (2016). Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: A molecular dynamics simulation investigation. Journal of Manufacturing Processes. 23, pp. 201-210. https://doi.org/10.1016/j.jmapro.2016.06.009
Advances in the surface defect machining (SDM) of hard steels
Rashid, W.B. and Goel, S. (2016). Advances in the surface defect machining (SDM) of hard steels. Journal of Manufacturing Processes. 23, pp. 37-46. https://doi.org/10.1016/j.jmapro.2016.05.007
Influence of microstructure on the cutting behaviour of silicon
Goel, S., Kovalchenko, A., Stukowski, A. and Cross, G. (2016). Influence of microstructure on the cutting behaviour of silicon. Acta Materialia. 105, pp. 464-478. https://doi.org/10.1016/j.actamat.2015.11.046
Investigating the emission characteristics of single crystal YAG when activated by high power laser beams
Salimian, A, Silver, J, Fern, GR, Upadhyaya, H, Metcalfe, A, Ireland, TG, Harris, P and Haghpanahan, R (2016). Investigating the emission characteristics of single crystal YAG when activated by high power laser beams. ECS Journal of Solid State Science and Technology. 5 (10), pp. R172-R177. https://doi.org/10.1149/2.0271610jss
Laser diode induced lighting modules
Salimian, A., Fern, G.R., Upadhyaya, H. and Silver, J. (2016). Laser diode induced lighting modules. ECS Journal of Solid State Science and Technology. 5 (3), pp. R26-R33. https://doi.org/10.1149/2.0101603jss
Type VI Collagen Regulates Dermal Matrix Assembly and Fibroblast Motility
Theocharidis, G, Drymoussi, Z, Kao, AP, Barber, AH, Lee, DA, Braun, KM and Connelly, JT (2016). Type VI Collagen Regulates Dermal Matrix Assembly and Fibroblast Motility. Journal of Investigative Dermatology. 136 (1), pp. 74-83. https://doi.org/10.1038/JID.2015.352
Evaluation of bioprosthetic heart valve failure using a matrix-fibril shear stress transfer approach
Anssari-Benam, A, Barber, AH and Bucchi, A (2016). Evaluation of bioprosthetic heart valve failure using a matrix-fibril shear stress transfer approach. Journal of Materials Science: Materials in Medicine. 27 (2). https://doi.org/10.1007/s10856-015-5657-2
Failure mechanisms in denture adhesives
An, Y, Li, D, Roohpour, N, Gautrot, JE and Barber, AH (2016). Failure mechanisms in denture adhesives. Dental Materials. 32 (5), pp. 615-623. https://doi.org/10.1016/j.dental.2016.01.007
Morphological and Mechanical Biomimetic Bone Structures
Parwani, R, Curto, M, Kao, AP, Rowley, PJ, Pani, M, Tozzi, G and Barber, AH (2016). Morphological and Mechanical Biomimetic Bone Structures. ACS Biomaterials Science & Engineering. 3 (11), pp. 2761-2767. https://doi.org/10.1021/acsbiomaterials.6b00652
High mobility titanium-doped indium oxide for use in tandem solar cells deposited via pulsed DC magnetron sputtering
Grew, B, Bowers, JW, Lisco, F, Arnou, N, Walls, JM and Upadhyaya, HM (2014). High mobility titanium-doped indium oxide for use in tandem solar cells deposited via pulsed DC magnetron sputtering. Energy Procedia. 60 (C), pp. 148-155. https://doi.org/10.1016/j.egypro.2014.12.357
Design and optimisation of process parameters in an in-line CIGS evaporation pilot system
Wei, Z., Bobbili, P.R., Senthilarasu, S., Shimell, T. and Upadhyaya, H.M. (2014). Design and optimisation of process parameters in an in-line CIGS evaporation pilot system. Surface & Coatings Technology. 241, pp. 159-167. https://doi.org/10.1016/j.surfcoat.2013.10.033
Spray deposited copper zinc tin sulphide (Cu<inf>2</inf>ZnSnS<inf>4</inf>) film as a counter electrode in dye sensitized solar cells
Swami, S.K., Chaturvedi, N., Kumar, A., Chander, N., Dutta, V., Kumar, D.K., Ivaturi, A., Senthilarasu, S. and Upadhyaya, H.M. (2014). Spray deposited copper zinc tin sulphide (Cu<inf>2</inf>ZnSnS<inf>4</inf>) film as a counter electrode in dye sensitized solar cells. Physical Chemistry Chemical Physics. 16 (43), pp. 23993-23999. https://doi.org/10.1039/c4cp03312d