Strain softening observed during nanoindentation of Equimolar-Ratio Co-Mn-Fe-Cr-Ni High Entropy Alloy

Journal article

Owhal, A., Belwanshi, V., Roy, T. and Goel, S. (2024). Strain softening observed during nanoindentation of Equimolar-Ratio Co-Mn-Fe-Cr-Ni High Entropy Alloy. Journal of Micromanufacturing. https://doi.org/10.1177/25165984241228094
AuthorsOwhal, A., Belwanshi, V., Roy, T. and Goel, S.
Abstract

This research article presents an atomistic study on the cyclic nanoindentation of equimolarratio Co-Mn-Fe-Cr-Ni high entropy alloy (HEA) using molecular dynamics simulation. The study investigated the effects of indentation depth on the cyclic load vs. indentation depth of the HEA. The results showed that the cyclic response exhibits a pronounced shift towards plasticity with pile-up formation instead of sinking behaviour at higher indentation depth.
Within the realm of MD simulations, the simulated hardness value reached up to 16 GPa for initial indentation cycle. A steep drop in the load-displacement curve was observed during
elastic-plastic transition signifying substantial strain softening of the substrate. It was found that the densely clustered stacking faults undergoes a reverse transition during cyclic loading, contributing to the back propagation phase responsible for elastic recovery, despite subsequent
strain hardening. The study provides important insights into the underlying mechanisms governing the cyclic mechanical behavior of HEAs to guide their improved micromanufacturing.

KeywordsHEA, nanoindentation
Year2024
JournalJournal of Micromanufacturing
PublisherSage
ISSN2516-5992
Digital Object Identifier (DOI)https://doi.org/10.1177/25165984241228094
Web address (URL)https://journals.sagepub.com/home/jmf
Publication dates
Print23 Feb 2024
Publication process dates
Accepted23 Nov 2023
Deposited28 Nov 2023
Accepted author manuscript
License
File Access Level
Open
Permalink -

https://openresearch.lsbu.ac.uk/item/95q4x

Download files

Accepted author manuscript
author copy.pdf
License: CC BY 4.0
File access level: Open

  • 52
    total views
  • 25
    total downloads
  • 2
    views this month
  • 2
    downloads this month

Export as

Related outputs

Feasibility of manufacturing high aspect ratio hollow tubes of SS410 through wire-arc directed energy deposition
Singh, A., Bedi, R., Nath, T., Dommeti, S.G., Goel, S. and Sekar, S. (2024). Feasibility of manufacturing high aspect ratio hollow tubes of SS410 through wire-arc directed energy deposition . International Journal of Advanced Manufacturing Technology.
Readiness of artificial intelligence technology for managing energy demands from renewable sources
Verma, J., Sandys, L., Matthews, A. and Goel, S. (2024). Readiness of artificial intelligence technology for managing energy demands from renewable sources . Engineering Applications of Artificial Intelligence. 135, p. 108831. https://doi.org/10.1016/j.engappai.2024.108831
Black phosphorus: The rise of phosphorene in 2D materials applications
Mishra, R., Sarkar, J., Chianella, I., Goel, S. and Nezhad, H. (2024). Black phosphorus: The rise of phosphorene in 2D materials applications. Next Materials. 4, p. 100217. https://doi.org/10.1016/j.nxmate.2024.100217
Diamond machining of additively manufactured Ti6Al4V ELI: Newer mode of material removal challenging the current simulation tools
Khatri, N., Barkachary, B.M., Singh, S., Manjunath, K., Chandra, N., Armstrong, J., Agrawal, A. and Goel, S. (2024). Diamond machining of additively manufactured Ti6Al4V ELI: Newer mode of material removal challenging the current simulation tools . Journal of Manufacturing Processes. 120, pp. 378-390. https://doi.org/10.1016/j.jmapro.2024.04.051
Influence of an Engineered Notch on the Electromagnetic Radiation Performance of NiTi Shape Memory Alloy
Anand, A., Kumar, Rajeev, Pandey, S., Hasnain, S. M. Mozammil and Goel, S. (2024). Influence of an Engineered Notch on the Electromagnetic Radiation Performance of NiTi Shape Memory Alloy. Materials. 17 (7), p. 1708. https://doi.org/10.3390/ma17071708
Nanomaterial integration in micro LED technology: Enhancing efficiency and applications
Mishra, R., Verma, K., Chianella, I., Goel, S. and Nezhad, H. (2024). Nanomaterial integration in micro LED technology: Enhancing efficiency and applications. Next Nanotechnology. 5 (100056). https://doi.org/10.1016/j.nxnano.2024.100056
Microstructure, Precipitation and Micro-segregation in Inconel 825 Weldments: A Comparative study between GTAW and EBW
Choudhury, B., Singh, V., Selvarajan, L., Goel, S. and Chandrasekaran, M. (2024). Microstructure, Precipitation and Micro-segregation in Inconel 825 Weldments: A Comparative study between GTAW and EBW. Materials Chemistry and Physics. 318. https://doi.org/10.1016/j.matchemphys.2024.129249
A close-packed sphere model for characterising porous networks in atomistic simulations and its application in energy storage and conversion
Nair, M., Khaitan, A., Owhala, A., Chandraa, I., Belgamwar, S., Mishra, R., Goel, S. and Roy, T. (2024). A close-packed sphere model for characterising porous networks in atomistic simulations and its application in energy storage and conversion. Carbon. 225. https://doi.org/10.1016/j.carbon.2024.119089
Deep Learning and Image data-based surface cracks recognition of laser nitrided Titanium alloy
Awan, M., Chan, C., Murphy, A., Kumar, D., Goel, S. and McClory, C. (2024). Deep Learning and Image data-based surface cracks recognition of laser nitrided Titanium alloy. Results in Engineering. 22 (102003). https://doi.org/10.1016/j.rineng.2024.102003
Nanostructured ZnO-CQD Hybrid Heterostructure Nanocomposites: Synergistic Engineering for Sustainable Design, Functional Properties, and High-Performance Applications
Mishra, R.K., Chianella, I., Sarkar, J., Nezhad, H.Y. and Goel, S. (2024). Nanostructured ZnO-CQD Hybrid Heterostructure Nanocomposites: Synergistic Engineering for Sustainable Design, Functional Properties, and High-Performance Applications. ChemNanoMat. https://doi.org/10.1002/cnma.202400020
Borophene: A 2D Wonder Shaping the Future of Nanotechnology and Materials Science
Mishra, R.K., Verma, K., Chianella, I., Nezhad, H.Y. and Goel, S. (2024). Borophene: A 2D Wonder Shaping the Future of Nanotechnology and Materials Science. Nano Materials Science. https://doi.org/10.1016/j.nanoms.2024.03.007
Forest hardening and Hirth lock during grinding of copper evidenced by MD simulations
Pratap, A., Kumar, N., Fan, P., Goel, S. and Joshi, S. (2024). Forest hardening and Hirth lock during grinding of copper evidenced by MD simulations. Manufacturing Letters. 40, pp. 58-64. https://doi.org/10.1016/j.mfglet.2024.03.002
Cutting edge preparation of microdrills by shear thickening polishing for improved hole quality in electronic PCBs
Wang, J., Ke, M., Liao, J., Zhou, Y., Goel, S., Verma, J., Wang, X., Guo, W., Yuan, J. and Lyu, B. (2024). Cutting edge preparation of microdrills by shear thickening polishing for improved hole quality in electronic PCBs. Frontiers of Mechanical Engineering. 19 (15). https://doi.org/10.1007/s11465-024-0786-2
Theoretical and experimental investigations on conformal polishing of microstructured surfaces
Zhang, P., Jing, Z., Goel, S., Hou, X., Wang, C., Cheung, C.F., Tian, Y. and Guo, J. (2024). Theoretical and experimental investigations on conformal polishing of microstructured surfaces. International Journal of Mechanical Sciences. 268, p. 109050. https://doi.org/10.1016/j.ijmecsci.2024.109050
Cellulose based materials to accelerate the transition towards sustainability
Verma, J., Petru, M. and Goel, S. (2024). Cellulose based materials to accelerate the transition towards sustainability . Industrial Crops and Products. 210, p. 118078. https://doi.org/10.1016/j.indcrop.2024.118078
Machine learning model of acoustic signatures: Towards digitalised thermal spray manufacturing
Viswathan, V., McCloskey, A., Mathur, R., Nguyen, D.T., Faisal, N.H., Parathuru, A., Llavori, I., Murphy, A., Tiwari, A., Matthews, A., Agrawal, A. and Goel, S. (2024). Machine learning model of acoustic signatures: Towards digitalised thermal spray manufacturing. Mechanical Systems and Signal Processing. 208, p. 111030. https://doi.org/10.1016/j.ymssp.2023.111030
Strain induced electrochemical behaviors of ionic liquid electrolytes in an electrochemical double layer capacitor: Insights from molecular dynamics simulations
Roy, T., Goel, S., Costa, L., Titirici, M., Offer, G., Marinescu, M. and Wang, H. (2023). Strain induced electrochemical behaviors of ionic liquid electrolytes in an electrochemical double layer capacitor: Insights from molecular dynamics simulations. The Journal of Chemical Physics. 159 (24). https://doi.org/10.1063/5.0166976
The Effect of Zinc Oxide on DLP Hybrid Composite Manufacturability and Mechanical-Chemical Resistance
Baronins, J., Antonov, M., Abramovskis, V., Rautmane, A., Lapkovskis, V., Bockovs, I., Goel, S., Thakur, V.K. and Shishkin, A. (2023). The Effect of Zinc Oxide on DLP Hybrid Composite Manufacturability and Mechanical-Chemical Resistance. Polymers. 15 (52), p. 4679. https://doi.org/10.3390/polym15244679
High-Temperature Lightweight Ceramics with Nano-sized Ferrites for EMI Shielding: Synthesis, Characterization, and Potential Applications
Abramivskis, V., Zalite, I., Maiorov, M., Baronins, J., Singh, A.K., Lapkovskis, V., Goel, S. and Shishkin, A. (2023). High-Temperature Lightweight Ceramics with Nano-sized Ferrites for EMI Shielding: Synthesis, Characterization, and Potential Applications. Materials. 16 (24), p. 7615. https://doi.org/10.3390/ma16247615
Mechanism of surface modification on monocrystalline silicon during diamond polishing at nanometric scale
Ranjan, P., Roy, T. and Sharma, A. (2023). Mechanism of surface modification on monocrystalline silicon during diamond polishing at nanometric scale. Journal of Micromanufacturing. https://doi.org/10.1177/25165984231206690
Atomistic study on the effect of the size of diamond abrasive particle during polishing of stainless steel
Ranjan, P., Sharma, A. and Roy, T. (2023). Atomistic study on the effect of the size of diamond abrasive particle during polishing of stainless steel. Journal of Micromanufacturing. https://doi.org/10.1177/25165984231202060
Anisotropic plasticity mechanisms in a newly synthesised High Entropy Alloy investigated using atomic simulations and nanoindentation experiments
Fan, P., Kumar, N., Arshad, M., Bai, M., Mao, H. and Goel, S. (2023). Anisotropic plasticity mechanisms in a newly synthesised High Entropy Alloy investigated using atomic simulations and nanoindentation experiments. Journal of Alloys and Compounds. 970, p. 172541. https://doi.org/10.1016/j.jallcom.2023.172541
Resistance Driven H2 Gas Sensor: High Entropy Alloy Nanoparticles Decorated 2D MoS2
Mondal, B., Zhang, X., Kumar, S., Long, F., Katiyar, N., Kumar, N., Goel, S. and Biswas, K. (2023). Resistance Driven H2 Gas Sensor: High Entropy Alloy Nanoparticles Decorated 2D MoS2. Nanoscale. https://doi.org/10.1039/D3NR04810A
Evaluating the elastic behaviour of Boron Nitride nanotube (BNNT) reinforced Phenolic nanocomposites
Sinha, S., Kumar, D., Goel, S. and Patnaik, A. (2023). Evaluating the elastic behaviour of Boron Nitride nanotube (BNNT) reinforced Phenolic nanocomposites. Engineering Research Express. 5, p. 045003. https://doi.org/10.1088/2631-8695/acfc98
Acoustic emission sensor assisted process monitoring of air plasma sprayed titanium deposition
Venkatachalapathy, V., Prathuru, A., Faisal, N.H. and Goel, S. (2023). Acoustic emission sensor assisted process monitoring of air plasma sprayed titanium deposition. Journal of Thermal Spray Technology. https://doi.org/10.1007/s11666-023-01663-6
Graphene nanoplatelets/Barium titanate Polymer Nanocomposite Fibril: A Remanufactured Multifunctional Material with Unprecedented Electrical, Thermomechanical and Electromagnetic Properties
Mishra, R., Goel, S., Chianella, I. and Nezhad, H. (2023). Graphene nanoplatelets/Barium titanate Polymer Nanocomposite Fibril: A Remanufactured Multifunctional Material with Unprecedented Electrical, Thermomechanical and Electromagnetic Properties. Advanced Sustainable Systems. https://doi.org/10.1002/adsu.202300177
Fabrication and testing of a multifunctional SiO2@ZnO core-shell nanospheres incorporated polymer coating for sustainable marine transport
Verma, J., Geng, Y., Wang, J. and Goel, S. (2023). Fabrication and testing of a multifunctional SiO2@ZnO core-shell nanospheres incorporated polymer coating for sustainable marine transport. Scientific Reports. 13, p. 12321. https://doi.org/10.1038/s41598-023-39423-9
Mechanism of material removal in tungsten carbide-cobalt alloy during chemistry enhanced shear thickening polishing
Wang, J., Tang, T., Goel, S., Zhou, Y., Dai, Y., Wang, J., He, Q., Yuan, J. and Lyu, B. (2023). Mechanism of material removal in tungsten carbide-cobalt alloy during chemistry enhanced shear thickening polishing . Journal of Materials Research and Technology. 25, pp. 6865-6879. https://doi.org/10.1016/j.jmrt.2023.07.112
Surface polishing and modification of Ti-6Al-4V alloy by shear thickening polishing
Wang, J., Zhou, Y., Qiao, Z., Goel, S., Wang, J., Wang, X., Chen, H., Yuan, J. and Lyu, B. (2023). Surface polishing and modification of Ti-6Al-4V alloy by shear thickening polishing. Surface & Coatings Technology. 468, p. 129771. https://doi.org/10.1016/j.surfcoat.2023.129771
Low electric field induction in BaTiO3-epoxy nanocomposites
Misra, R.K., Li, D., Chianella, I., Goel, S., Lotfian, S. and Nezhad, H.Y. (2023). Low electric field induction in BaTiO3-epoxy nanocomposites. Functional Composite Materials. 4 (6), pp. 023-0043. https://doi.org/10.1186/s42252-023-00043-1
Additive Manufacturing and Physicomechanical Characteristics of PEGDA Hydrogels: Recent Advances and Perspective for Tissue Engineering
Khalili, M.H., Zhang, R., Wilson, S., Goel, S., Impey, S.A. and Aria, A.I. (2023). Additive Manufacturing and Physicomechanical Characteristics of PEGDA Hydrogels: Recent Advances and Perspective for Tissue Engineering. Polymers. 15 (10), p. 2341. https://doi.org/10.3390/polym15102341
Microscopic stress analysis of nanoscratch induced sub-surface damage in a single-crystal silicon wafer
Huang, N., Zhou, P. and Goel, S. (2023). Microscopic stress analysis of nanoscratch induced sub-surface damage in a single-crystal silicon wafer. Precision Engineering. https://doi.org/10.1016/j.precisioneng.2023.04.006
A Guiding Framework for Process Parameter Optimisation of Thermal Spraying
Venkatachalapathy, V., Kumar, N., Matthews, A., Endrino, J. and Goel, S. (2023). A Guiding Framework for Process Parameter Optimisation of Thermal Spraying. Coatings. 13 (4), p. 713. https://doi.org/10.3390/coatings13040713
Mechanical Behavior of 3D Printed Poly(ethylene glycol) Diacrylate Hydrogels in Hydrated Conditions Investigated Using Atomic Force Microscopy
Khalili, M., Panchal, V., Dulebo, A., Hawi, S., Zhang, R., Wilson, S., Dossi, E., Goel, S., Impey, S.A. and Aria, A. (2023). Mechanical Behavior of 3D Printed Poly(ethylene glycol) Diacrylate Hydrogels in Hydrated Conditions Investigated Using Atomic Force Microscopy. ACS Applied Polymer Materials. 5 (4), p. 3034. https://doi.org/10.1021/acsapm.3c00197
Phase prediction and experimental realisation of a new high entropy alloy using machine learning
Singh, S., Kumar, N., Goel, S. and Joshi, S.N. (2023). Phase prediction and experimental realisation of a new high entropy alloy using machine learning. Scientific Reports. 13, p. 4811. https://doi.org/10.1038/s41598-023-31461-7
Control over Multi-Scale Self-Organization-Based Processes under the Extreme Tribological Conditions of Cutting through the Application of Complex Adaptive Surface-Engineered Systems
Fox-Rabinovich, G., Gershman, I., Goel, S. and Endrino, J.L. (2023). Control over Multi-Scale Self-Organization-Based Processes under the Extreme Tribological Conditions of Cutting through the Application of Complex Adaptive Surface-Engineered Systems. Lubricants. 11 (3), p. 106. https://doi.org/10.3390/lubricants11030106
Thermo-physical characteristics of 3C-SiC structure subjected to microwave exposure: A molecular dynamics study
Dora, T. L., Owhal, A., Roy, T., Belgamwar, S., Goel, S., Nezhad, H. and Mishra, R. (2023). Thermo-physical characteristics of 3C-SiC structure subjected to microwave exposure: A molecular dynamics study . Materials Today Communications. https://doi.org/10.1016/j.mtcomm.2023.105693
Research on development of aspheric diffractive optical element for mid-infrared imaging
Khatri, N., Berwal, S., Manjunath, M., Singh, B., Mishra, V. and Goel, S. (2023). Research on development of aspheric diffractive optical element for mid-infrared imaging. Infrared Physics & Technology. 129, p. 104582. https://doi.org/10.1016/j.infrared.2023.104582
Recent Progress and Perspective on Batteries made from Nuclear Waste
Kumar, N. and Goel, S. (2023). Recent Progress and Perspective on Batteries made from Nuclear Waste. Nuclear Science and Techniques. https://doi.org/10.1007/s41365-023-01189-0
Nanoindentation Response of 3D Printed PEGDA Hydrogels in a Hydrated Environment
Khalili, M.H., Williams, C.J., Micallef, C., Duarte-Martinez, F., Afsar, A., Zhang, R., Wilson, S., Dossi, E., Impey, S.A., Goel, S. and Aria, A.I. (2023). Nanoindentation Response of 3D Printed PEGDA Hydrogels in a Hydrated Environment. ACS Applied Polymer Materials. 5 (2), pp. 1180-1190. https://doi.org/10.1021/acsapm.2c01700
Nanoparticle mediated cancer cell therapy: Basic science to clinical applications
Verma, J., Warsame, C., Seenivasagam, R.K., Kumar, N., Abdel Aleem, E. and Goel, S. (2023). Nanoparticle mediated cancer cell therapy: Basic science to clinical applications. Cancer and Metastasis Reviews. https://doi.org/10.1007/s10555-023-10086-2
Characterization of quenched MD simulated porous carbon electrodes for supercapacitors
Khaitan, A., Owhal, A., Nair, M.R., Sahoo, S., Belgamwar, S.U., Goel, S. and Roy, T. (2023). Characterization of quenched MD simulated porous carbon electrodes for supercapacitors. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.01.065
Oblique nanomachining of Gallium Arsenide explained using AFM experiments and MD simulations
Fan, P., Kumar, N., Goel, S., He, Y., Geng, Y., Yan, Y., Mao, H. and Luo, X. (2023). Oblique nanomachining of Gallium Arsenide explained using AFM experiments and MD simulations. Journal of Manufacturing Processes. 90, pp. 125-138. https://doi.org/10.1016/j.jmapro.2023.01.002
Effect of surface oxide layers in Solid-State Welding of Aluminium Alloys - Review
Zlatanovic, D.L., Bergmann, J.P., Balos, S., Hildebrand, J., Bojanic-Sejat, M. and Goel, S. (2023). Effect of surface oxide layers in Solid-State Welding of Aluminium Alloys - Review . Science and Technology of Welding and Joining. 28 (5), pp. 331-351. https://doi.org/10.1080/13621718.2023.2165603
A perspective on nanocomposite coatings for advanced functional applications
Verma, J. and Goel, S. (2023). A perspective on nanocomposite coatings for advanced functional applications. Nanofabrication. https://doi.org/10.37819/nanofab.008.270
Uniaxial pulling and nano-scratching of a newly synthesized high entropy alloy
Fan, P., Kumar, N., Zhou, X. and Goel, S. (2022). Uniaxial pulling and nano-scratching of a newly synthesized high entropy alloy. APL Materials. 10 (11), p. 111118. https://doi.org/10.1063/5.0128135
Industry 4.0 and Digitalisation in Healthcare.
Popov, V., Kudryavtseva, E., Kumar, N., Shishkin, A., Stepanov, S. and Goel, S. (2022). Industry 4.0 and Digitalisation in Healthcare. Materials. 15 (6). https://doi.org/10.3390/ma15062140
Scanning Probe Lithography: State-of-the-Art and Future Perspectives
Fan, Pengfei, Gao, Jian, Mao, Hui, Geng, Y., Yan, Yongda, Wang, Yuzhang, Goel, S. and Luo, Xichun (2022). Scanning Probe Lithography: State-of-the-Art and Future Perspectives. Micromachines. 13 (2), p. e228. https://doi.org/10.3390/mi13020228
A critical review on cancer vaccines based on tumor-associated anti-gens: a promising immunotherapy
Verma, J., Warsame, C. and Goel, S. (2022). A critical review on cancer vaccines based on tumor-associated anti-gens: a promising immunotherapy. BioMaterials and Polymers Horizons. https://doi.org/10.37819/bph.001.03.0300
Data mining to map nutrition value of industrial cheese produced in France
Nguyen, D.T., Singh, S. and Goel, S. (2022). Data mining to map nutrition value of industrial cheese produced in France. BioMaterials and Polymers Horizons. https://doi.org/10.37819/bph.001.03.0298
Design considerations to fabricate multifunctional superomniphobic surfaces: a review
Verma, J., Bennett, G.J. and Goel, S. (2022). Design considerations to fabricate multifunctional superomniphobic surfaces: a review. Vacuum.
Review of the untapped potentials of antimicrobial materials in the construction sector
Kirthika, S.K., Goel, G., Matthews, A. and Goel, S. (2022). Review of the untapped potentials of antimicrobial materials in the construction sector. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2022.101065
Quantifying the differences in properties between polycrystals containing planar and curved grain boundaries
Forrest, R.M., Lazar, E.A., Goel, S. and Bean, J.J. (2022). Quantifying the differences in properties between polycrystals containing planar and curved grain boundaries. Nanofabrication. 7, pp. 11-23. https://doi.org/10.37819/nanofab.007.250
Uniaxial pulling and nano-scratching of a newly synthesised high entropy alloy
Fan, P., Kumar, N., Zhou, X. and Goel, S. (2022). Uniaxial pulling and nano-scratching of a newly synthesised high entropy alloy. APL Materials. https://doi.org/10.1063/5.0128135
State-of-the-art in bioresources for sustainable transportation
Verma, J. and Goel, S. (2022). State-of-the-art in bioresources for sustainable transportation. International Journal of Hydrogen Energy. https://doi.org/10.1016/j.ijhydene.2022.10.206
Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities
Faisal, N.H., Prathuru, A., Ahmed, R., Rajendran, V., Hossain, M., Venkatachalapathy, V., Kumar, N., Li, J., Liu, Y., Cai, Q., Horri, B.A., Thanganadar, D., Singh Sodhi, G., Patchigolla, P., Fernandez, C., Joshi, S., Govindarajan, S., Kurushina, V., Katikaneni, S. and Goel, S. (2022). Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities. ChemNanoMat. p. e202200384. https://doi.org/10.1002/cnma.202200384
Cost-effective electrocatalysts for Hydrogen Evolution Reactions (HER): Challenges and Prospects
Verma, J. and Goel, S. (2022). Cost-effective electrocatalysts for Hydrogen Evolution Reactions (HER): Challenges and Prospects. International Journal of Hydrogen Energy. https://doi.org/10.1016/j.ijhydene.2022.09.075
Modal analysis of novel coronavirus (SARS COV-2) using finite element methodology
Warsame, C., Valerini, D., Llavori, I., Barber, A. and Goel, S. (2022). Modal analysis of novel coronavirus (SARS COV-2) using finite element methodology. Journal of the Mechanical Behavior of Biomedical Materials. 135, p. 105406. https://doi.org/10.1016/j.jmbbm.2022.105406
Repurposing superhydrophobic surfaces into icephobic surfaces
Khaleque, T. and Goel, S. (2022). Repurposing superhydrophobic surfaces into icephobic surfaces. Materials Today: Proceedings. 64 (3), pp. 1526-1532. https://doi.org/10.1016/j.matpr.2022.05.585
Understanding the surface generation mechanism during microscratching of Ti-6Al-4V
Pratap, A., Divse, V., Goel, S. and Joshi, S.S (2022). Understanding the surface generation mechanism during microscratching of Ti-6Al-4V. Journal of Manufacturing Processes. 82, pp. 543-558. https://doi.org/10.1016/j.jmapro.2022.08.014
Correlating tool wear to intact carbon fibre contacts during drilling of Continuous Fibre Reinforced Polymers (CFRP)
McClelland, J., Murphy, A., Jin, Y. and Goel, S. (2022). Correlating tool wear to intact carbon fibre contacts during drilling of Continuous Fibre Reinforced Polymers (CFRP). Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.727
Designing porous electrode structures for supercapacitors using Quenched MD simulations
Khaitan, A., Owhal, A., Belgamwar, S.U., Mishra, R.R., Goel, S. and Roy, T. (2022). Designing porous electrode structures for supercapacitors using Quenched MD simulations. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.726
A critical review of the developments in molecular dynamics simulations to study femtosecond laser ablation
Pariz, I., Goel, S, Nguyen, D.J, Buckeridge, J and Zhou, X (2022). A critical review of the developments in molecular dynamics simulations to study femtosecond laser ablation. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.723
A short review of vapour droplet dispersion models used in CFD to study the airborne spread of COVID19.
Mehade Hussain, S., Goel, S., Kadapa, C. and Aristodemou, E. (2022). A short review of vapour droplet dispersion models used in CFD to study the airborne spread of COVID19. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.724
A hybrid Grey-TOPSIS based quantum behaved particle swarm optimization for selection of electrode material to machine Ti6Al4V by electro-discharge machining
Sahu, A.K., Mahapatra, S.S., Leite, M. and Goel, S. (2022). A hybrid Grey-TOPSIS based quantum behaved particle swarm optimization for selection of electrode material to machine Ti6Al4V by electro-discharge machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering . 44 (188). https://doi.org/10.1007/s40430-022-03494-y
Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges
Faisal, N.H., Ahmed, R., Sellami, N., Prathuru, A., Njuguna, J., Venturi, F., Hussain, T., Nezhad, H.Y., Kumar, N., Goel, S., Upadhyaya, H., Joshi, S., Muhammad-Sukki, F., Prabhu, R., Mallick, T., Whittow, W. and Kamnis, S. (2022). Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges. Advanced Engineering Materials. https://doi.org/10.1002/adem.202200171
Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals
Mir, A., Luo, X., Llavori, I., Roy, A., Zlatanovic, D.L., Joshi, S.N. and Goel, S. (2022). Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals. Journal of the Mechanical Behavior of Biomedical Materials. 130, p. 105185. https://doi.org/10.1016/j.jmbbm.2022.105185
Prospects of MXenes in energy storage applications.
Lokhande, P E, Pakdel, A., Pathan, H M, Kumar, D., Vo, Dai-Viet N, Al-Gheethi, A., Sharma, A., Goel, S., Singh, P.P. and Lee, B-K. (2022). Prospects of MXenes in energy storage applications. Chemosphere. https://doi.org/10.1016/j.chemosphere.2022.134225
Influence of Rotational Speed on the Electrical and Mechanical Properties of the Friction Stir Spot Welded Aluminium Alloy Sheets
Zlatanovic, D.L., Bergmann, J.P., Balos, S., Gräzel, M., Pejic, D., Sovilj, P. and Goel, S. (2022). Influence of Rotational Speed on the Electrical and Mechanical Properties of the Friction Stir Spot Welded Aluminium Alloy Sheets. Welding in the World. https://doi.org/10.1007/s40194-022-01267-8
A method for non-destructive determination of cocoa bean fermentation levels based on Terahertz hyperspectral imaging
Nguyen, D., Pissard, A., Fernandez Pierna, J.A., Rogez, H., Souza, J., Dortu, F., Goel, S., Hernandez, Y. and Baeten, V. (2022). A method for non-destructive determination of cocoa bean fermentation levels based on Terahertz hyperspectral imaging. International Journal of Food Microbiology. 365 (109537). https://doi.org/10.1016/j.ijfoodmicro.2022.109537
Thermal response of multi-layer UV crosslinked PEGDA hydrogels
Khalili, M. H., Afsar, A., Zhang, R., Wilson, S., Dossi, E., Goel, S., Impey, S. A. and Aria, A. I. (2022). Thermal response of multi-layer UV crosslinked PEGDA hydrogels. Polymer Degradation and Stability. 195, p. 109805. https://doi.org/10.1016/j.polymdegradstab.2021.109805
Nanomaterials based Biosensing: Methods and principle of detection
Kumar, N., Goel, G. and Goel, S. (2022). Nanomaterials based Biosensing: Methods and principle of detection. in: Joshi SN and Chandra P (ed.) Advanced Micro and Nano Manufacturing Technologies - Applications in Biochemical and Biomedical Engineering Springer Nature.
Critical Review of Nanopillar-Based Mechanobactericidal Systems
Hawi, Sara, Goel, S., Kumar, V., Pearce, Oliver, Ayre, Wayne Nishio and Ivanova, E. (2022). Critical Review of Nanopillar-Based Mechanobactericidal Systems. ACS Applied Nano Materials. 5 (1), pp. 1-17. https://doi.org/10.1021/acsanm.1c03045
Clay Swelling: Role of Cations in Stabilizing/Destabilizing Mechanisms.
Chen, W., Grabowski, Robert C and Goel, S. (2022). Clay Swelling: Role of Cations in Stabilizing/Destabilizing Mechanisms. ACS Omega. 7 (4), pp. 3185-3191. https://doi.org/10.1021/acsomega.1c04384
Influence of Tool Geometry and Process Parameters on the Properties of Friction Stir Spot Welded Multiple (AA 5754 H111) Aluminium Sheets.
Labus Zlatanovic, D., Balos, S., Bergmann, J., Rasche, Stefan, Pecanac, M. and Goel, S. (2021). Influence of Tool Geometry and Process Parameters on the Properties of Friction Stir Spot Welded Multiple (AA 5754 H111) Aluminium Sheets. Materials. 14 (5). https://doi.org/ma14051157
Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review.
Popov, V., Grilli, M., Koptyug, A., Jaworska, L., Katz-Demyanetz, A., Klobčar, D., Balos, S., Postolnyi, B. and Goel, S. (2021). Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review. Materials. 14 (4). https://doi.org/ma14040909
Solutions of Critical Raw Materials Issues Regarding Iron-Based Alloys.
Novák, P., Belezze, T., Cabibbo, M., Gamsjäger, Ernst, Wiessner, Manfred, Rajnovic, D., Jaworska, L., Hanus, P., Shishkin, A., Goel, G. and Goel, Saurav (2021). Solutions of Critical Raw Materials Issues Regarding Iron-Based Alloys. Materials. 14 (4). https://doi.org/ma14040899
Development of carbonaceous tin-based solder composite achieving unprecedented joint performance
Hawi, S., Gharavian, S., Burda, M., Goel, S., Lotfian, S., Khaleque, T. and Yazdani Nezhad, H. (2021). Development of carbonaceous tin-based solder composite achieving unprecedented joint performance . Emergent Materials. 4, pp. 1679-1696. https://doi.org/10.1007/s42247-021-00337-9
Experimental investigation on microwave sintered composite tool for electro-discharge machining of Titanium alloy
Sahu, A.K., Mahapatra, S.S., Bhoi, N.K., Singh, H., Leite, M. and Goel, S. (2021). Experimental investigation on microwave sintered composite tool for electro-discharge machining of Titanium alloy. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-021-06546-x
Nanofabrication route to achieve sustainable production of next generation defect-free graphene: analysis and characterisation
Misra, S., Katiyar, N.K., Kumar, A., Goel, S. and Biswas, K. (2021). Nanofabrication route to achieve sustainable production of next generation defect-free graphene: analysis and characterisation. Nanofabrication. 6 (1), pp. 36-43. https://doi.org/10.1515/nanofab-2020-0101
Fabrication of three-dimensional sin-shaped ripples using a multi-tip diamond tool based on the force modulation approach
Wang, Y., Fan, P., Luo, X., Geng, Y., Goel, S., Wu, W., Li, G. and Yan, Y. (2021). Fabrication of three-dimensional sin-shaped ripples using a multi-tip diamond tool based on the force modulation approach. Journal of Manufacturing Processes. 72, p. 262. https://doi.org/10.1016/j.jmapro.2021.10.032
Computational prediction of electrical and thermal properties of graphene and BaTiO3 reinforced epoxy nanocomposites
Mishra, R.K., Goel, S. and Nezhad, H.Y. (2021). Computational prediction of electrical and thermal properties of graphene and BaTiO3 reinforced epoxy nanocomposites. BioMaterials and Polymers Horizons. 1 (1), pp. 1-14.
Role of Thermal Spray in Combating Climate Change
Viswanathan, V., Kumar, N., Goel, G., Matthews, A. and Goel, S. (2021). Role of Thermal Spray in Combating Climate Change. Emergent Materials. https://doi.org/10.1007/s42247-021-00307-1
A Bibliometric Study on Biomimetic and Bioinspired Membranes for Water Filtration
Goel, G., Hélix-Nielsen, C., Upadhyaya, H. and Goel, S. (2021). A Bibliometric Study on Biomimetic and Bioinspired Membranes for Water Filtration . npj Clean Water. 4. https://doi.org/10.1038/s41545-021-00131-4
High yield recovery of 2,3-butanediol from fermented broth accumulated on xylose rich sugarcane bagasse hydrolysate using aqueous two-phase extraction system
Narisetty, V., Amraoui, Y., Abdullah, A., Ahmad, E., Agrawal, D., Parameswaran, B., Pandey, A., Goel, S. and Kumar, V. (2021). High yield recovery of 2,3-butanediol from fermented broth accumulated on xylose rich sugarcane bagasse hydrolysate using aqueous two-phase extraction system. Bioresource Technology. 337, p. 125463. https://doi.org/10.1016/j.biortech.2021.125463
An analytical model to predict the depth of sub-surface damage for grinding of brittle materials
Yin, J., Bai, Q., Goel, S., Zhou, P. and Zhang, B. (2021). An analytical model to predict the depth of sub-surface damage for grinding of brittle materials. CIRP Journal of Manufacturing Science and Technology . 33, pp. 454-464. https://doi.org/10.1016/j.cirpj.2021.03.019
Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation
Faisal, N.H., Sellami, N., Venturi, F., Hussain, T., Mallick, T., Muhammad-Sukki, F., Bishop, A., Upadhyaya, H., Kumar, N. and Goel, S. (2021). Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. Emergent Materials. https://doi.org/10.1007/s42247-021-00252-z
Nature inspired materials: Emerging trends and prospects
Kumar, N., Goel, G., Hawi, S. and Goel, S. (2021). Nature inspired materials: Emerging trends and prospects . NPG Asia Materials. 15 (56). https://doi.org/10.1038/s41427-021-00322-y
Emergence of machine learning in the development of high entropy alloy and their prospects in advanced engineering applications
Kumar, N., Goel, G. and Goel, S. (2021). Emergence of machine learning in the development of high entropy alloy and their prospects in advanced engineering applications. Emergent Materials. https://doi.org/10.1007/s42247-021-00249-8
Atomic scale friction studies on single crystal GaAs using AFM and molecular dynamics simulation
Fan, P., Goel, S., Luo, X. and Upadhyaya, H. (2021). Atomic scale friction studies on single crystal GaAs using AFM and molecular dynamics simulation. Nanomanufacturing and Metrology. https://doi.org/10.1007/s41871-021-00109-3
Molecular dynamics simulation of AFM tip-based hot scratching of nanocrystalline GaAs
Fan, P., Goel, S., Luo, X., Yan, Y., Geng, Y., He, Y. and Wang, Y. (2021). Molecular dynamics simulation of AFM tip-based hot scratching of nanocrystalline GaAs. Materials Science in Semiconductor Processing. 130, p. 105832. https://doi.org/10.1016/j.mssp.2021.105832
Origins of ductile plasticity in a polycrystalline gallium arsenide during scratching: MD simulation study
Fan, P., Goel, S., Luo, X., Yan, Y., Geng, Y. and He, Y. (2021). Origins of ductile plasticity in a polycrystalline gallium arsenide during scratching: MD simulation study. Applied Surface Science. 552, p. 149489. https://doi.org/10.1016/j.apsusc.2021.149489
In-depth microscopic characterisation of the weld faying interface revealing stress-induced metallurgical transformations during friction stir spot welding
Zlatanovi, D. L., Balos, S., Bergmann, J. P., Rasche, S., Zavašnik, J., Panchal, V., Sidjanin, L. and Goel, S. (2021). In-depth microscopic characterisation of the weld faying interface revealing stress-induced metallurgical transformations during friction stir spot welding. International Journal of Machine Tools and Manufacture. 164, p. 103716.
Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting.
Popov, V., Fleisher, A., Muller-Kamskii, G., Shishkin, A., Katz-Demyanetz, A., Travitzky, N. and Goel, S. (2021). Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting. Scientific Reports. 11 (1), p. 2438. https://doi.org/10.1038/s41598-021-81861-w
Using circular economy principles to recycle materials in guiding the design of a wet scrubber-reactor for indoor air disinfection from coronavirus and other pathogens.
Shishkin, A., Goel, G., Baronins, J., Ozolins, J., Hoskins, C. and Goel, S. (2021). Using circular economy principles to recycle materials in guiding the design of a wet scrubber-reactor for indoor air disinfection from coronavirus and other pathogens. Environmental technology & innovation. 22, p. 101429. https://doi.org/10.1016/j.eti.2021.101429
Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle
Larrañaga-Altuna, M., Zabala, A., Llavori, I., Pearce, O., Nguyen, D., Caro, J., Mescheder, Holger, Endrino, J., Goel, G., Ayre, W., Seenivasagam, R., Tripathy, D., Armstrong, Joe and Goel, S. (2021). Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle. Applied Physics Reviews. 8 (2), p. 021303. https://doi.org/10.1063/5.0028844
The importance of wavelength for tight temperature control during μ-laser-assisted machining
Dennis, Ashley, Goel, S., Al-Sayegh, Rajab and O’Neill, William (2020). The importance of wavelength for tight temperature control during μ-laser-assisted machining. Journal of Micromanufacturing. 4 (1), pp. 93-98. https://doi.org/10.1177/2516598420917866
An atomistic investigation on the wear of diamond during atomic force microscope tip-based nanomachining of Gallium Arsenide
Fan, P., Goel, S., Luo, X., Yan, Y., Geng, Y. and Wang, Y. (2020). An atomistic investigation on the wear of diamond during atomic force microscope tip-based nanomachining of Gallium Arsenide. Computational Materials Science. 187, p. 110115. https://doi.org/10.1016/j.commatsci.2020.110115
New insights into the methods for predicting ground surface roughness in the age of digitalisation
Yuhang, P., Ping, Z., Ying, Y., Anupam, A., Yonghao, W., Dongming, G. and Goel, S. (2020). New insights into the methods for predicting ground surface roughness in the age of digitalisation. Precision Engineering. 67, pp. 393-418. https://doi.org/10.1016/j.precisioneng.2020.11.001
Horizons of modern molecular dynamics simulation in digitalised solid freeform fabrication with advanced materials
Goel, S., Knaggs, M., Goel, G., Zhou, X. W., Upadhyaya, H.M., Thakur, V. F., Kumar, V., Bizarri, G., Tiwari, A., Murphy, A., Stukowskii, A. and Matthewsj, A. (2020). Horizons of modern molecular dynamics simulation in digitalised solid freeform fabrication with advanced materials. Materials Today Chemistry. 18, p. 100356. https://doi.org/10.1016/j.mtchem.2020.100356
Surface Defect incorporated Diamond Machining of Silicon
Khatri, N., Barkachary, B.M., Muneeswaran, B/, Al-Sayegh, R., Luo, X. and Goel, S. (2020). Surface Defect incorporated Diamond Machining of Silicon. International Journal of Extreme Manufacturing. 2 (4). https://doi.org/10.1088/2631-7990/abab4a
Distribution of shallow NV centers in diamond revealed by photoluminescence spectroscopy and nanomachining
Jadidi, M.F., Ozer, H.O., Goel, S, Kilpatrick, J.I., McEvoy, N., McCloskey, D., Donegan, J.F. and Cross, G.L.W. (2020). Distribution of shallow NV centers in diamond revealed by photoluminescence spectroscopy and nanomachining. Carbon. 167, pp. 114-121. https://doi.org/10.1016/j.carbon.2020.04.086
Elastic recovery of monocrystalline silicon during ultra-fine rotational grinding
Huang, N., Yan, Y., Zhou, P., Kang, R., Guo, D. and Goel, S. (2020). Elastic recovery of monocrystalline silicon during ultra-fine rotational grinding. Precision Engineering. 65, pp. 64-71. https://doi.org/10.1016/j.precisioneng.2020.05.004
Resilient and Agile Engineering Solutions to Address Societal Challenges like Coronavirus Pandemic
Goel, S., Hawi, S., Goel, G., Thakur, V.K., Pearce, O., Hoskins, C., Hussain, T., Agrawal, A., Upadhyaya, H., Cross, G. and Barber, A. (2020). Resilient and Agile Engineering Solutions to Address Societal Challenges like Coronavirus Pandemic. Materials Today Chemistry. https://doi.org/10.1016/j.mtchem.2020.100300
The Critical Raw Materials in Cutting Tools for Machining Applications: A Review
Goel, S. (2020). The Critical Raw Materials in Cutting Tools for Machining Applications: A Review. Materials . 13 (1377). https://doi.org/10.3390/ma13061377
An experimental study on lap joining of multiple sheets of aluminium alloy (AA 5754) using friction stir spot welding
Goel, S., Zlatanovic DL and Balos S (2020). An experimental study on lap joining of multiple sheets of aluminium alloy (AA 5754) using friction stir spot welding. International Journal of Advanced Manufacturing Technology. 107, pp. 3093-3107. https://doi.org/10.1007/s00170-020-05214-z
Towards an improved understanding of plasticity, friction and wear mechanisms in precipitate containing AZ91 Mg alloy
Kumar D, Goel, S., Gosvami N and Jain J (2020). Towards an improved understanding of plasticity, friction and wear mechanisms in precipitate containing AZ91 Mg alloy. Materialia. 10, p. 100640. https://doi.org/10.1016/j.mtla.2020.100640
Functional evaluation and testing of a newly developed Teleost’s Fish Otolith derived biocomposite coating for healthcare
Goel, S, Montanez, N. D., Carreno, H., Escobar, P., Estupinan, H. A., Pena, D. Y. and Endrino, J. L. (2020). Functional evaluation and testing of a newly developed Teleost’s Fish Otolith derived biocomposite coating for healthcare. Scientific Reports. 10 (1), pp. 1-16. https://doi.org/10.1038/s41598-019-57128-w
Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems
Daminabo, S. C., Goel, S, Grammatikos, S. A., Nezhad, H. Y. and Thakur, V. K. (2020). Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Materials Today Chemistry. 16, p. 100248. https://doi.org/10.1016/j.mtchem.2020.100248
On the Use of the Theory of Critical Distances with Mesh Control for Fretting Fatigue Lifetime Assessment
Zabala, A., Infante-Garcia, Giner, E., Goel, S., Endrino, J.L. and Llavori, I. (2020). On the Use of the Theory of Critical Distances with Mesh Control for Fretting Fatigue Lifetime Assessment . Tribology International . 142, p. 105985. https://doi.org/https://doi.org/10.1016/j.triboint.2019.105985
Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V
Liu C, Goel S, Llavori I, Stolf P, Giusca CL, Zabala A, Kohlscheen J, Paiva JM, Endrino JL and Veldhuis SC Fox Rabinovich GS (2019). Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V. Journal of the Mechanical Behavior of Biomedical Materials. 97, pp. 126-137. https://doi.org/10.1016/j.jmbbm.2019.05.013
Fabrication of functionalised surfaces on Gum metal (Ti-30Nb) using micromachining
Hawi, S., Dickins, A., Pardal, G.R., Giusca, C., Pearce, O. and Goel, S. (2019). Fabrication of functionalised surfaces on Gum metal (Ti-30Nb) using micromachining . euspen’s 19th International Conference & Exhibition, Bilbao, ES, June 2019. Bilbao 03 - 07 Jun 2019 EUSPEN.
Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding
Balos, S., Dramicanin, M., Janjatovic, P., Zabunov, I., Pilic, B., Goel, S. and Szutkowska, M. (2019). Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding. Metals. 9 (11), p. 1187. https://doi.org/10.3390/met9111187
The role of high-pressure coolant in the wear characteristics of WC-Co tools during the cutting of Ti–6Al–4V
Stolf, P., Paiva, J.M., Ahmed, Y.S., Endrina, J.L., Goel, S. and Veldhuis, S.C. (2019). The role of high-pressure coolant in the wear characteristics of WC-Co tools during the cutting of Ti–6Al–4V. Wear. 440-441, p. 203090. https://doi.org/10.1016/j.wear.2019.203090
Molecular dynamics simulation of the elliptical vibration assisted machining (EVAM) of pure iron
Goel S, Martinez FD, Chavoshi SZ, Khatri N and Giusca C (2018). Molecular dynamics simulation of the elliptical vibration assisted machining (EVAM) of pure iron. Journal of Micromanufacturing. 1 (1), pp. 6-19. https://doi.org/10.1177/2516598418765359
The possibility of performing FEA analysis of a contact loading process fed by the MD simulation data
Goel S, Iñigo Llavori AZ, Giusca C, Veldhuis SC and Endrino JL (2018). The possibility of performing FEA analysis of a contact loading process fed by the MD simulation data. International Journal of Machine Tools and Manufacture. 134, pp. 79-80. https://doi.org/10.1016/j.ijmachtools.2018.07.003
Incipient plasticity in tungsten during nanoindentation: Dependence on surface roughness, probe radius and crystal orientation
Beake B and Goel, S. (2018). Incipient plasticity in tungsten during nanoindentation: Dependence on surface roughness, probe radius and crystal orientation. International Journal of Refractory Metals and Hard Materials. 75, pp. 63-69. https://doi.org/https://doi.org/10.1016/j.ijrmhm.2018.03.020
Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten
Goel, S., Cross, G., Stukowski, A., Gamsjager, E., Beake, B. and Agrawal, A. (2018). Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten. Computational Materials Science. 152, pp. 196-210. https://doi.org/https://doi.org/10.1016/j.commatsci.2018.04.044
Current trends and future of sequential micro-machining processes on a single machine tool
Chavoshi, S.Z., Goel, S. and Morantz, P. (2017). Current trends and future of sequential micro-machining processes on a single machine tool. Materials & Design. 127, pp. 37-53. https://doi.org/10.1016/j.matdes.2017.04.057
Cyclic nanoindentation and nano-impact fatigue mechanisms of functionally graded TiN/TiNi film
Faisal NH, Prathuru AK, Goel S, Ahmed R, Droubi MG, Beake BD and Fu YQ (2017). Cyclic nanoindentation and nano-impact fatigue mechanisms of functionally graded TiN/TiNi film. Shape Memory and Superelasticity. 3, pp. 149-167. https://doi.org/10.1007/s40830-017-0099-y
Addressing the discrepancy of finding equilibrium melting point of silicon using MD simulations
Chavoshi SZ, Xu S and Goel S (2017). Addressing the discrepancy of finding equilibrium melting point of silicon using MD simulations. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. https://doi.org/10.1098/rspa.2017.0084
Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: A molecular dynamics simulation investigation
Chavoshi, S.Z., Goel, S. and Luo, X. (2016). Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: A molecular dynamics simulation investigation. Journal of Manufacturing Processes. 23, pp. 201-210. https://doi.org/10.1016/j.jmapro.2016.06.009
Advances in the surface defect machining (SDM) of hard steels
Rashid, W.B. and Goel, S. (2016). Advances in the surface defect machining (SDM) of hard steels. Journal of Manufacturing Processes. 23, pp. 37-46. https://doi.org/10.1016/j.jmapro.2016.05.007
Influence of microstructure on the cutting behaviour of silicon
Goel, S., Kovalchenko, A., Stukowski, A. and Cross, G. (2016). Influence of microstructure on the cutting behaviour of silicon. Acta Materialia. 105, pp. 464-478. https://doi.org/10.1016/j.actamat.2015.11.046