Analysing integrated renewable energy and smart-grid systems to improve voltage quality and harmonic distortion losses at electric-vehicle charging stations
Journal article
Khan, A, Memon, S and Sattar, TP (2018). Analysing integrated renewable energy and smart-grid systems to improve voltage quality and harmonic distortion losses at electric-vehicle charging stations. IEEE Access.
| Authors | Khan, A, Memon, S and Sattar, TP |
|---|---|
| Abstract | Increasing the use of Electric-Vehicles (EV) is regarded as a step in the right direction to reduce air-pollution and carbon emissions. However, a dramatic increase of EV and charging stations has raised voltage quality and harmonic distortion issues that affect the performance of integrated renewable power sources (wind and solar) and smart-grid electrical transmission networks. This paper models an integrated electric-vehicle charging and battery storage system operating in the presence of unpredictable wind and solar power sources. The aim is to enable the design of an electrical control system that develops the correct duty cycle to stabilise and regulate the voltage at the DC/DC power conversion station. Simulations are performed to evaluate energy management by the proposed control system. The proposed system effectively manages the electric power on the grid by drawing power from the batteries at peak times and then charging them in off-peak times, reducing the load on the converter and enabling the reduction of charging time for electric vehicles. A constant voltage is achieved on the grid irrespective of fluctuations in renewable energy generation and in the load. |
| Keywords | Smart Grid; Electrical Systems; Voltage Quality; Electric Vehicle; AC/DC conversion |
| Year | 2018 |
| Journal | IEEE Access |
| Publisher | Institute of Electrical and Electronics Engineers (IEEE) |
| ISSN | 2169-3536 |
| Digital Object Identifier (DOI) | doi:10.1109/ACCESS.2018.2830187 |
| Publication dates | |
| 25 Apr 2018 | |
| Publication process dates | |
| Deposited | 28 Apr 2018 |
| Accepted | 25 Apr 2018 |
| Accepted author manuscript | License CC BY 4.0 |
Permalink -
https://openresearch.lsbu.ac.uk/item/86v21
17
total views33
total downloads1
views this month0
downloads this month
Related outputs
Thermal performance analysis of a new structured-core translucent vacuuminsulation panel in comparison to vacuum glazing: Experimental and theoretically validated analyses
Katsura, Takao, Memon, S, Radwan, Ali, Nakamura, Makoto and Nagano, Katsunori (2020). Thermal performance analysis of a new structured-core translucent vacuuminsulation panel in comparison to vacuum glazing: Experimental and theoretically validated analyses. Solar Energy. 199, pp. 326-346.Royal Society Summer Science Exhibition "Robot Detectives: Sherlock Holmes meets Spiderman"
Sattar, T (2019). Royal Society Summer Science Exhibition "Robot Detectives: Sherlock Holmes meets Spiderman".Robot Detectives: Sherlock Homes meets Spiderman
Sattar, T (2019). Robot Detectives: Sherlock Homes meets Spiderman. ICC Excel Centre, LondonDevelopment of an automated mobile robot vehicle inspection system for ndtof large steel plates
Rakocevic, M, Wang, X, Chen, S, Khalid, A, Sattar, T and Bridge, B (1999). Development of an automated mobile robot vehicle inspection system for ndtof large steel plates. Insight. 41 (6), pp. 376-382.Miniaturized dipole antenna development for low frequency ground penetrating radar (GPR) system
Howlader, OF and Sattar, TP (2016). Miniaturized dipole antenna development for low frequency ground penetrating radar (GPR) system. IET Colloquium on Antennas, Wireless and Electromagnetics. Glasgow, Scotland 26 - 26 May 2016 doi:10.1049/ic.2016.0040Advancements in Smart Windows: Triple Vacuum Insulated Glazing for Sustainable Low-Carbon Buildings
Memon, S (2019). Advancements in Smart Windows: Triple Vacuum Insulated Glazing for Sustainable Low-Carbon Buildings. World Sustainable Energy Days 2019. Wels, Austria 27 Feb - 01 Mar 2019 Austria World Sustainable Energy Days.Development of CLAWAR Systems that combine the functions of Monitoring, Mobility, Manipulation and Measurement for Industrial Inspection Tasks
Sattar, TP, Bridge, B, Chen, S and Zhao, Z (2003). Development of CLAWAR Systems that combine the functions of Monitoring, Mobility, Manipulation and Measurement for Industrial Inspection Tasks. 6th International Conference on Climbing and Walking Robots and their Supporting Technologies, CLAWAR 2003. Catania, Italy 17 - 19 Sep 2003 Professional Engineering Publishing Ltd, UK. pp. 699-706PDA Depth Control of a FPSO Swimming Robot
Shang, J, Sattar, TP and Leon-Rodriguez, HE (2006). PDA Depth Control of a FPSO Swimming Robot. 9th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Brussels, Belgium 12 - 14 Sep 2006 pp. 541-544Design of a Climbing Robot for Inspecting Aircraft Wings and Fuselage
Shang, J, Sattar, TP and Leon-Rodriguez, HE (2006). Design of a Climbing Robot for Inspecting Aircraft Wings and Fuselage. 9th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Brussels, Belgium 12 - 14 Sep 2006 pp. 552-557Portable 7 DOF Scanning Arm For Non-destructive Inspection Of Objects With Unknown Geometry
Sattar, TP and Brenner, A (2006). Portable 7 DOF Scanning Arm For Non-destructive Inspection Of Objects With Unknown Geometry. 9th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Brussels, Belgium 12 - 14 Sep 2006 pp. 527-532Wall Climbing And Pipe Crawler Robots For Nozzle Weld Inspection Inside Nuclear Pressure Vessels
Leon-Rodriguez, HE, Sattar, T, Shang, J, Bouloubasis, AK and Markopoulos, YP (2006). Wall Climbing And Pipe Crawler Robots For Nozzle Weld Inspection Inside Nuclear Pressure Vessels. 9th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Brussels, Belgium 12 - 14 Sep 2006 pp. 545-551Internal in-service inspection of the floor and walls of oil, petroleum, and chemical storage tanks with a mobile robot
Sattar, TP, Zhao, Z, Feng, J, Bridge, B, Mondal, S and Chen, S (2002). Internal in-service inspection of the floor and walls of oil, petroleum, and chemical storage tanks with a mobile robot. 5th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Paris, France 25 - 27 Sep 2002 pp. 947-954Tofd inspection of v-groove butt welds on the hull of a container ship with a magnetically adhering wall climbing robot
Mondal, S, Sattar, TP and Bridge, B (2002). Tofd inspection of v-groove butt welds on the hull of a container ship with a magnetically adhering wall climbing robot. 5th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Paris, France 25 - 27 Sep 2002 pp. 955-961ROBAIR: Mobile Robotic System to Inspect Aircraft Wings and Fuselage
Sattar, TP, Chen, S, Bridge, B and Shang, J (2003). ROBAIR: Mobile Robotic System to Inspect Aircraft Wings and Fuselage. Robotics and Factories of the Future. 2, pp. 795-802.The Centre for Automated and Robotic Non-Destructive Testing
Sattar, TP and Bridge, B (2005). The Centre for Automated and Robotic Non-Destructive Testing. CLAWAR Newsletter, GROWTH Thematic Network on Climbing and Walking Robotics: Mobile robotic demonstrators and applications.7-axis Arm for NDT of Surfaces with Complex & Unknown Geometry
Sattar, TP and Brenner, A (2005). 7-axis Arm for NDT of Surfaces with Complex & Unknown Geometry. 8th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2005). London South Bank University, London, UK 12 - 15 Sep 2005 Springer. pp. 943-950 doi:10.1007/3-540-26415-9-113Automated NDT of floating production storage oil tanks with a swimming and climbing robot
Sattar, TP, Rodriguez, H, Shang, J and Bridge, B (2006). Automated NDT of floating production storage oil tanks with a swimming and climbing robot. 8th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2005). London South Bank University, London, UK 12 - 15 Sep 2005 Springer. pp. 935-942 doi:https://www.doi.org/10.1007/3-540-26415-9-112Amphibious Robot For Weld Inspection Inside Floating Production Oil Storage Tanks
Sattar, TP, Leon-Rodriguez, HE, Shang, J, Gan, T and Lagonikas, A (2006). Amphibious Robot For Weld Inspection Inside Floating Production Oil Storage Tanks. 9th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Brussels, Belgium 12 - 14 Sep 2006 pp. 533-540Climbing ring robot for inspection of offshore wind turbines
Rodriguez, HL, Bridge, B and Sattar, TP (2008). Climbing ring robot for inspection of offshore wind turbines. in: Marques, L, de Almeida, A, Tokhi, MO and Virk, GS (ed.) Advances in Mobile Robotics World Scientific Publishing Co. pp. 555-562Robotic non-destructive testing
Sattar, TP (2010). Robotic non-destructive testing. Industrial Robot: An International Journal. 37 (5).Towards Optimum Design Of Magnetic Adhesion Wall Climbing Wheeled Robots
Sattar, T, Salman, H and Salinas, E (2011). Towards Optimum Design Of Magnetic Adhesion Wall Climbing Wheeled Robots. Khan, KM and Win, NL (ed.) 26th International Conference on CAD/CAM, Robotics and Factories of the Future 2011. Kuala Lumpur, Malaysia 26 - 28 Jul 2011 pp. 716-728An ICT-Enabled Approach to Optimising the Reliability of Manual Ultrasonic Non-Destructive Testing
Bennecer, A, Selcuk, C, Gan, TH, Sattar, TP, Edwards, G, Girolami, M, Chatzakos, A and Lopatka, R (2012). An ICT-Enabled Approach to Optimising the Reliability of Manual Ultrasonic Non-Destructive Testing. BINDT Aerospace Symposium. Northamptonshire, UK 11 - 13 Sep 2012Disseminating mechatronics research results (via science and engineering exhibitions)
Sattar, T and Salinas, E (2014). Disseminating mechatronics research results (via science and engineering exhibitions). 15th International Workshop on Research and Education in Mechatronics (REM). El Gouna, Egypt 09 - 11 Sep 2014 pp. 1-7 doi:https://www.doi.org/10.1109/REM.2014.6920236Underwater wall climbing robot for nuclear pressure vessel inspection
Rodriguez, H, Sattar, T and Shang, J (2008). Underwater wall climbing robot for nuclear pressure vessel inspection. 2008 International Conference on Climbing and Walking Robots. Coimbra, Portugal 05 - 08 Sep 2008 World Scientific. pp. 605-612Robotic system for inspection of test objects with unknown geometry using NDT methods
Brenner, AA and Sattar, TP (2008). Robotic system for inspection of test objects with unknown geometry using NDT methods. 11th International Comference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Coimbra, Portugal 08 - 10 Sep 2008 pp. 589-596Distributed mobile robots
Sattar, T, Patel, T and Rodriguez, HL (2010). Distributed mobile robots. 13th International Conference on Climbing and Walking Robots and the Support Technology for Mobile Machines. Japan 31 Aug - 03 Sep 2010 pp. 106-114Solar thermal performance of two innovative configurations of airvacuumlayered triple glazed windows
Yueping, Fang, Memon, Saim, Jingqing, Peng, Mark, Tyrer and Tingzhen, Ming (2019). Solar thermal performance of two innovative configurations of airvacuumlayered triple glazed windows. Renewable Energy. 150, pp. 167-175.Introductory Chapter: Introduction to Advanced Thermoelectric Materials for Energy Harvesting Applications
Memon, S. (2019). Introductory Chapter: Introduction to Advanced Thermoelectric Materials for Energy Harvesting Applications. in: Memon, S. (ed.) Advanced Thermoelectric Materials for Energy Harvesting Applications LondonIdentification of Fatigue Damage Evaluation using Entropy of Acoustic Emission Waveform
Santo, F., Sattar, T., Mba, D. and Edwards, G. (2019). Identification of Fatigue Damage Evaluation using Entropy of Acoustic Emission Waveform. SN Applied Sciences. 2 (138).Validation of Acoustic Emission Waveform Entropy as a Damage Identification Feature
Santo, F., Sattar, T. and Edwards, G. (2019). Validation of Acoustic Emission Waveform Entropy as a Damage Identification Feature. Applied Sciences MDPI. 9 (4070), p. 27.Experimental and Numerical Optimization of Magnetic Adhesion Force for Wall Climbing Robot Applications
Sahbel, A., Abbas, A and Sattar, T (2019). Experimental and Numerical Optimization of Magnetic Adhesion Force for Wall Climbing Robot Applications. International Journal of Mechanical Engineering and Robotics Research. 8 (1), pp. 18-24.