Experimental study on heat transfer from rectangular fins in combined convection

Journal article

Basiri, M., Goshayeshi, H., Chaer, I., Pourpasha, H. and Heris, S.Z. (2023). Experimental study on heat transfer from rectangular fins in combined convection. Journal of Thermal Engineering. 9 (6), pp. 1632-1642. https://doi.org/10.18186/thermal.1401534
AuthorsBasiri, M., Goshayeshi, H., Chaer, I., Pourpasha, H. and Heris, S.Z.
Abstract

Combined natural and forced convective heat transfer arise in many transport processes in engineering devices and in nature, which is frequently encountered in industrial and technical processes, including electronic devices cooled by fans, heat exchangers placed in a low-velocity environment, and solar receivers exposed to winds. In this study, the effects of design
parameters have been experimentally investigated for the air-side thermal performance under combined (natural and forced)convection of the rectangular plate heat sinks, and the values of optimum design parameters were sought. Many ideas for improving cooling methods have been proposed, one of which is the heat sink. In this work, the average Nusselt number (Nu) and thermal resistance of a simple base rectangular plate and five vertical rectangular plate heat sinks with different numbers of fins under natural and combined convection were experimentally investigated to obtain the maximum average Nu and minimum thermal resistance for various Reynolds numbers (Re) from 2300 to 40000, Rayleigh numbers (Ra) from 1300000 to 13000000, and Richardson numbers (Ri) from 0.4 to 3. Also, in this experiment, fin spacing (P) was varied from 2.8 mm to 14.6 mm and the dimensionless P/H ratio was varied from 0.1
to 0.49. The flow velocity varied in the range of 2 to 8 m/s under combined convection. Based on the effects of Ri and Re, two empirical equations for natural and also for combined convection heat transfer were derived to calculate the average Nu. The average deviation for these two equations is about 7%.The outcomes of this research can be beneficial for engineers who
work on electronics cooling systems.

KeywordsPlate Heat Sink; Combined Convection; Rectangular Fin; Richardson Number; Empirical Equation
Year2023
JournalJournal of Thermal Engineering
Journal citation9 (6), pp. 1632-1642
PublisherYıldız Technical University
ISSN2148-7847
Digital Object Identifier (DOI)https://doi.org/10.18186/thermal.1401534
Web address (URL)https://dergipark.org.tr/tr/pub/thermal/issue/81272/1401534
Publication dates
Online30 Nov 2023
Publication process dates
Completed30 Nov 2023
Deposited20 Dec 2023
Publisher's version
License
File Access Level
Open
Accepted author manuscript
License
File Access Level
Controlled
Permalink -

https://openresearch.lsbu.ac.uk/item/95y3z

Download files

Publisher's version
10.18186-thermal.1401534-3584619.pdf
License: CC BY-NC 4.0
File access level: Open

  • 67
    total views
  • 44
    total downloads
  • 7
    views this month
  • 0
    downloads this month

Export as

Related outputs

Insights into two-phase flow dynamics in closed-loop pulsating heat pipes utilizing Fe
Goshayeshi, H.R., Mousavi, S.B., Heris, S.Z. and Chaer, I. (2024). Insights into two-phase flow dynamics in closed-loop pulsating heat pipes utilizing Fe. Scientific Reports. 14 (1), p. 16497. https://doi.org/10.1038/s41598-024-67637-y
Novel cooling system for free-standing photovoltaic panels
Kargaran, M., Goshayeshi, H. R, Saleh, S. R., Zahmatkesh, I. and Chaer, I. (2024). Novel cooling system for free-standing photovoltaic panels. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. 46 (1), pp. 8155-8170. https://doi.org/10.1080/15567036.2024.2368492
Finite Element Modelling to Design a Concrete Dual-Probe – An Innovative Tool for Monitoring the Drying of Concrete
Ye, Z. and Chaer, I. (2024). Finite Element Modelling to Design a Concrete Dual-Probe – An Innovative Tool for Monitoring the Drying of Concrete. Fifteen International Conference on Thermal Engineering: Theory and Applications. Tashkent, Uzbekistan 28 May - 01 Jun 2024 ICTEA: International Conference on Thermal Engineering.
Cooling Effect of 3D Oscillating Heat Pipe with Nanofluid on Photovoltaic Panel in Hot Climates
Mahyar, K., Goshayeshi, H., Saleh, S., Zahmatkesh, I. and Chaer, I (2024). Cooling Effect of 3D Oscillating Heat Pipe with Nanofluid on Photovoltaic Panel in Hot Climates. Multiscale and Multidisciplinary Modeling, Experiments and Design. https://doi.org/10.1007/s41939-024-00394-7
A Review of the effect of Magnetic Field Using Nano fluids and Ultrasonic Amplification Technology on Water Desalination by Solar Stills
Samadi, K., Gosharshi, H. and Chaer, I. (2024). A Review of the effect of Magnetic Field Using Nano fluids and Ultrasonic Amplification Technology on Water Desalination by Solar Stills. Applied Solar Energy. Vol. 60 (, No. 1), p. 20–48. https://doi.org/10.3103/S0003701X23600820
Combined effect of the magnetic field, orientation, and filling ratio on cylindrical pulsating heat pipe using distilled water and distilled water/Fe3O4 nanofluid
Jajarm, A.R.A., Goshayshi, H., Bashirnezhad, K., Chaer, I., Toghraie, D. and Salahshour, S. (2024). Combined effect of the magnetic field, orientation, and filling ratio on cylindrical pulsating heat pipe using distilled water and distilled water/Fe3O4 nanofluid. Journal of Magnetism and Magnetic Materials. (590). https://doi.org/10.1016/j.jmmm.2024.171712
Theoretical Analysis of the Power Generation of Pumping Cycle Kite Power Systems Compared to Traditional Wind Turbines in Aberdeen
Ye, Z., Chaer, I., Hartungi, R. and Ross, M (2023). Theoretical Analysis of the Power Generation of Pumping Cycle Kite Power Systems Compared to Traditional Wind Turbines in Aberdeen. Frontiers in Built Environment. 9, p. 1091068. https://doi.org/10.3389/fbuil.2023.1091068
Assessing the performance gap of two dynamic thermal modelling software tools when comparing with real-time data in relation to thermal loss
Salehi, B., Andrews, D., Chaer, I., Gillich, A. and Newton, E. (2023). Assessing the performance gap of two dynamic thermal modelling software tools when comparing with real-time data in relation to thermal loss. Building Services Engineering Research and Technology. pp. 1-14. https://doi.org/10.1177/01436244231153839
Experimental acoustic testing of alternative ventilation ducts
Zekic, S., Gomez-Agustina, L., Aygun, H. and Chaer, I. (2023). Experimental acoustic testing of alternative ventilation ducts. Institute of Noise Control Engineering (INCE). https://doi.org/10.3397/in_2022_0390
An extensive review on the latest developments of using oscillating heat pipes for cooling photovoltaic thermal systems
Kargaran, M., Goshayeshi, H.R., Pourpasha, H., Chaer, I. and Zeinali, H.S. (2022). An extensive review on the latest developments of using oscillating heat pipes for cooling photovoltaic thermal systems. Thermal Science and Engineering Progress. 36 (101489). https://doi.org/10.1016/j.tsep.2022.101489
Experimental investigation of Multiwall Carbon Nanotubes/Water Nanofluid Pool Boiling on Smooth and Groove Surfaces
Moghadam, A. V., Goshayeshi, H. R., Chaer, I., Paurine, A. and Zeinali Heris, S. (2022). Experimental investigation of Multiwall Carbon Nanotubes/Water Nanofluid Pool Boiling on Smooth and Groove Surfaces. International Journal of Energy Research. https://doi.org/10.1002/er.8390
Comparison of Real-world Data with Simulated Results to Enhance Building Thermal Retention when using Shading Devices
Salehi, B., Andrews, D., Chaer, I., Newton, E. and Gillich, A. (2022). Comparison of Real-world Data with Simulated Results to Enhance Building Thermal Retention when using Shading Devices . CIBSE Technical Symposium 2022. London South Bank University 21 - 22 Apr 2022
The impact of using internet of things (IOT) to imporve the operational performance of a commercial building
Kibrom, E., Yebiyo, M., Chaer, I., Paurine, A., Gomez-Agustina, L. and Yousef, A. (2021). The impact of using internet of things (IOT) to imporve the operational performance of a commercial building . London South Bank University.
Review of Intelligent Control Systems for Natural Ventilation as Passive Cooling Strategy for UK Buildings and Similar Climatic Conditions
Mahmoudi Saber, E., Chaer, I., Gillich, A. and Ekpeti, B. (2021). Review of Intelligent Control Systems for Natural Ventilation as Passive Cooling Strategy for UK Buildings and Similar Climatic Conditions. Energies. 14 (15), p. e4388. https://doi.org/10.3390/en14154388
Flow Field Structure, Characteristics of Thermo-Hydraulic and Heat Transfer Performance Analysis in a Three Dimensions Circular Tube with Different Ball Turbulators Configurations
Al-Obaidi, A. R. and Chaer, I. (2021). Flow Field Structure, Characteristics of Thermo-Hydraulic and Heat Transfer Performance Analysis in a Three Dimensions Circular Tube with Different Ball Turbulators Configurations. Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-021-05943-7
Improving Thermal Energy Performance of UK Built Environment through the Use of Shading Devices
Salehi, B., Andrews, D., Chaer, I., Newton, E. and Gillich, A. (2021). Improving Thermal Energy Performance of UK Built Environment through the Use of Shading Devices. London Doctoral Academy Postgraduate Research Summer School 2021. London South Bank University 05 - 08 Jul 2021 London South Bank University.
Worked Examples of Radiation Heat Transfer
Chaer, I. and Goshayeshi, H.R. (2021). Worked Examples of Radiation Heat Transfer. Cheshmandazketab.ir.
Study of the Flow Characteristics, Pressure Drop and Augmentation of Heat Performance in a Horizontal Pipe with and without Twisted Tape Inserts
Ramadhan Al-Obaidi, A. and Chaer, I. (2021). Study of the Flow Characteristics, Pressure Drop and Augmentation of Heat Performance in a Horizontal Pipe with and without Twisted Tape Inserts. Case Studies in Thermal Engineering. https://doi.org/10.1016/j.csite.2021.100964
Experimental investigation on semicircular, triangular and rectangular shaped absorber of solar still with nano-based PCM
Goshayeshi, H.R., Chaer, I., Yebiyo, M. and Oztop, H.F. (2021). Experimental investigation on semicircular, triangular and rectangular shaped absorber of solar still with nano-based PCM. Journal of Thermal Analysis and Calorimetry. https://doi.org/10.1007/s10973-021-10728-z
A Review of Recent Advances in Emerging Alternative Heating and Cooling Technologies
Ismail, M., Yebiyo, M. and Chaer, I. (2021). A Review of Recent Advances in Emerging Alternative Heating and Cooling Technologies. Energies. 14 (2), pp. 502-502. https://doi.org/10.3390/en14020502
Experimental investigation of using Graphene Oxide with Ethylene Glycol and Water mixture to improve the performance of a car radiator
Chaer, I., Chabok, N., Goshayeshi, H., Ismail, M.E., Haddowe, S. and Yebiyo, M. (2020). Experimental investigation of using Graphene Oxide with Ethylene Glycol and Water mixture to improve the performance of a car radiator. ICTEA: International Conference on Thermal Engineering.
Advanced Convective Heat Transfer Worked Examples
Goshayeshi, H.R. and Chaer, I. (2020). Advanced Convective Heat Transfer Worked Examples. Cheshmandazketab.ir.
Measurement methods of acoustics properties for alternative ventilation ducts
Zekic, S, Gomez-Agustina, L, Aygun, H and Chaer, I (2020). Measurement methods of acoustics properties for alternative ventilation ducts. Inter Noise 2020. Seoul 23 - 26 Aug 2020 International Institute of Noise Control Engineering .
Comparison of the Yearly Power Generation of a Pumping Cycle Kite Power System and a Traditional Wind Turbine in Aberdeen Scotland UK
Ye, Z., Chaer, I., Hartungi, R., Lawner, H. and Ross, M. (2020). Comparison of the Yearly Power Generation of a Pumping Cycle Kite Power System and a Traditional Wind Turbine in Aberdeen Scotland UK. 13th International Conference on Thermal Engineering, Theory and Applications. Baku 12 - 14 Jun 2020
Novel economic modelling of a Peer-to-Peer Electricity Market with the inclusion of distributed energy storage
Yebiyo, M, Mercado, RA, Aaron, G, Chaer, I and Tony, D (2020). Novel economic modelling of a Peer-to-Peer Electricity Market with the inclusion of distributed energy storage. The Electricity Journal. 33 (2). https://doi.org/10.1016/j.tej.2020.106709
Advanced Radiation Heat Transfer
Chaer, Issa and Goshayeshi, Hamid Reza (2019). Advanced Radiation Heat Transfer. Frowsh Centre.
Experimental investigation of oscillating heat pipe efficiency for a novel condenser by using Fe3O4 nanofluid
Davari, H., Goshayeshi, H.R., Öztop, H.F. and Chaer, I. (2019). Experimental investigation of oscillating heat pipe efficiency for a novel condenser by using Fe3O4 nanofluid. Journal of Thermal Analysis and Calorimetry. pp. 1-10. https://doi.org/10.1007/s10973-019-09032-8
Viability of Airborne Wind Energy in the United Kingdom
Ye, Z, Chaer, I, Lawner, H and Ross, M (2019). Viability of Airborne Wind Energy in the United Kingdom. Journal of Thermal Science and Engineering Applications. 12 (1), p. 011008. https://doi.org/10.1115/1.4043387
Encouraging remanufacturing in the retail refrigeration industry
Muranko, Z, Andrews, D, Chaer, I, Newton, EJ and Proudman, P (2019). Encouraging remanufacturing in the retail refrigeration industry. Energy Procedia. 161, pp. 283-291. https://doi.org/10.1016/j.egypro.2019.02.093
Solar still efficiency enhancement by using graphene oxide/ paraffin composite
Mohammad Reza, S, Hamid Reza, G and Chaer, I (2019). Solar still efficiency enhancement by using graphene oxide/ paraffin composite. Energies. 12 (10), p. 2002. https://doi.org/10.3390/en12102002
Circular economy and behaviour change: Using persuasive communication to encourage pro-circular behaviours towards the purchase of remanufactured refrigeration equipment
Muranko, Z., Andrews, D, Chaer, I and Newton, EJ (2019). Circular economy and behaviour change: Using persuasive communication to encourage pro-circular behaviours towards the purchase of remanufactured refrigeration equipment. Journal of Cleaner Production. 222, pp. 499-510. https://doi.org/10.1016/j.jclepro.2019.02.219
Implementation of Renewable Energy Technologies in Rural Africa
Levodo, J, Ford, A and Chaer, I (2015). Implementation of Renewable Energy Technologies in Rural Africa. World Academy of Science, Engineering and Technology. Vol:9 (No:4), pp. 446-453.
Investigation of the performance characteristics of an ammonia-water absorption chiller in a tri-generation system arrangement
Hadawey, A, Tassou, S, Suamir, IN, Chaer, I and Marriott, D (2009). Investigation of the performance characteristics of an ammonia-water absorption chiller in a tri-generation system arrangement. 5th Heat Powered Cycles Conference. Berlin, Germany 07 Sep - 09 Nov 2009
Environmental impact and energy management of sports stadia
Chilvers, S, Chaer, I and Ford, A (2015). Environmental impact and energy management of sports stadia. CIB Joint International Symposium: Going North for Sustainability. LSBU, London 23 - 25 Nov 2015 London South Bank University.
Chapter 3 - Fluid Dynamics
Chaer, I, Doetsch, C, Kitanovski, A, Hansen, T, Frei, B, Vuarnoz., D and Reghem, P (2005). Chapter 3 - Fluid Dynamics. in: Kauffeld, M, Kawaji, M and Egolf, PW (ed.) Handbook on Ice Slurries - Fundamentals and Engineering Paris International Institute of Refrigeration. pp. 55-81
Performance Enhancement of Urban Ground Source Heat Pumps through Interactions with Underground Railway Tunnels
Revesz, A, Chaer, I, Thompson, J, Mavroulidou, M, Gunn, M and Maidment, GG (2018). Performance Enhancement of Urban Ground Source Heat Pumps through Interactions with Underground Railway Tunnels. Ashrae Winter Conference. Chicago 22 - 24 Jan 2018 London South Bank University.
Viability of Airborne Wind Energy in the United Kingdom
Chaer, I, Ye, Z, Lawner, H and Ross, M (2018). Viability of Airborne Wind Energy in the United Kingdom. 11th International Conference on Thermal Engineering: Theory and Applications. Doha, Qatar 25 - 28 Feb 2018
Smart Cities – Thermal Networks
Chaer, I, Pope, I and Paurine, A (2018). Smart Cities – Thermal Networks. Eleven International Conference on Thermal Engineering: Theory and Applications. Doha, Qatar 25 - 28 Feb 2018
The Challenge of Modelling Solar Shading Products and their Impact on the Built Environment
Venturi, L, Andrews, D, De Grussa, Z and Chaer, I (2018). The Challenge of Modelling Solar Shading Products and their Impact on the Built Environment. CIBSE Technical Symposium. London South Bank University, London 12 - 13 Apr 2018 CIBSE.
Reflective Glass Effect on Energy Consumption and Food Quality in Delicatessen Cabinets
Paurine, A, Maidment, GG and Chaer, I (2018). Reflective Glass Effect on Energy Consumption and Food Quality in Delicatessen Cabinets. CIBSE Technical Symposium. London, UK. 12 - 13 Apr 2018 CIBSE.
Study of Energy and Cost Savings of Demand Controlled Fresh Air Systems
Chaer, I and Ricchetti, A (2018). Study of Energy and Cost Savings of Demand Controlled Fresh Air Systems. CIBSE Technical Symposium. London, UK 12 - 13 Apr 2018 CIBSE.
The Pro-Circular Change Model (P-CCM)– Proposing A Framework Facilitating Behavioural Change Towards a Circular Economy
Muranko, Z, Andrews, D, Newton, EJ, Chaer, I and Proudman, P (2018). The Pro-Circular Change Model (P-CCM)– Proposing A Framework Facilitating Behavioural Change Towards a Circular Economy. Resources, Conservation and Recycling. 135, pp. 132-140. https://doi.org/10.1016/j.resconrec.2017.12.017
Feasibility Study of Pumping Cycle Kite Power System Implication in Scotland UK
Ye, Z, Lawner, H, Chaer, I and Marcus, R (2018). Feasibility Study of Pumping Cycle Kite Power System Implication in Scotland UK. 2018 3rd International Conference on Renewable Energy and Conservation. Sydney, Australia
Smart cities – Thermal networks for London
Chaer, I, Pope, I, Yebiyo, M and Paurine, A (2018). Smart cities – Thermal networks for London. Thermal Science and Engineering Progress. 8, pp. 10-16. https://doi.org/10.1016/j.tsep.2018.07.011
Developing a Circular Economy in the Retail Refrigeration Industry: The Influence of Financial Incentives, Quality Standards and Process Supporting Tools on the Behavioural Intentions to Purchase and Produce Remanufactured Refrigeration Equipment
Muranko, Z, Andrews, D, Chaer, I, Newton, EJ and Proudman, P (2018). Developing a Circular Economy in the Retail Refrigeration Industry: The Influence of Financial Incentives, Quality Standards and Process Supporting Tools on the Behavioural Intentions to Purchase and Produce Remanufactured Refrigeration Equipment. 2nd International Conference on Sustainable Energy and Resource Use in Food Chains (ICSEF 2018). Paphos, Cyprus 17 - 19 Oct 2018
Modelling of Heat Energy Recovery Potential form Underground Railways with Nearby Vertical Ground Heat Exchangers in an Urban Environment
Revesz, A, Chaer, I, Thompson, J, Mavroulidou, M, Gunn, M and Graeme, M (2018). Modelling of Heat Energy Recovery Potential form Underground Railways with Nearby Vertical Ground Heat Exchangers in an Urban Environment. Applied Thermal Engineering. 147, pp. 1059-1069. https://doi.org/10.1016/j.applthermaleng.2018.10.118
Carbon Reduction and Energy Optimization Strategy for one NHS Trust
Chaer, I and Sattar, E (2015). Carbon Reduction and Energy Optimization Strategy for one NHS Trust. Technical symposium 2017: delivery resilient high performance buildings. Loughborough University 05 - 06 Apr 2017 CIBSE. pp. ? - ? (21)
Using Life Cycle Assessment to Illustrate the Benefits of Blinds as Passive and Sustainable Energy Saving Products in the Domestic Environment in the UK
Andrews, D, De Grussa, Z and Chaer, I (2015). Using Life Cycle Assessment to Illustrate the Benefits of Blinds as Passive and Sustainable Energy Saving Products in the Domestic Environment in the UK. Going north for sustainability. London South Bank University 25 Nov 2015 London South Bank University.
An Assessment of Differing Environmental and Economic Factors and their Impact on the Development of a Circular Economy for Refrigerated Display Cabinets in the UK
Andrews, D, Muranko, Z and Chaer, I (2015). An Assessment of Differing Environmental and Economic Factors and their Impact on the Development of a Circular Economy for Refrigerated Display Cabinets in the UK. Sustainable Innovation 2015. University for the Creative Arts Epsom, Surrey, UK 09 - 10 Nov 2015 London South Bank University.
Novel Trigeneration Analysis Model (TAM) for Assessing Optimal Cooling and CCHP Scenarios in Urban New Developments
Chaer, I, Opara, P and Day, T (2017). Novel Trigeneration Analysis Model (TAM) for Assessing Optimal Cooling and CCHP Scenarios in Urban New Developments. 10th International Conference on Thermal Engineering: Theory and Applications. Muscat, Oman 26 - 28 Feb 2017
Unwrapped food product display shelf life assessment
Hadawey, A, Tassou, SA, Chaer, I and Sundararajan, R (2017). Unwrapped food product display shelf life assessment. Energy Procedia. 123, pp. 62-69. https://doi.org/10.1016/j.egypro.2017.07.233
Incentivising pro-circular behaviours: proposing a new enhanced capital allowance scheme for remanufactured products - the case of refrigerated display cabinets in the United Kingdom
Muranko, Z, Andrews, D, Chaer, I, Newton, EJ, Proudman, P and Longhurst, M (2017). Incentivising pro-circular behaviours: proposing a new enhanced capital allowance scheme for remanufactured products - the case of refrigerated display cabinets in the United Kingdom. Energy Procedia. 123, pp. 369-374. https://doi.org/10.1016/j.egypro.2017.07.271
Pro-circular behaviours and refrigerated display cabinets: supporting resource efficiency in the retail refrigeration sector
Muranko, Z, Andrews, D, Chaer, I, Newton, EJ, Proudman, P and Longhurst, M (2017). Pro-circular behaviours and refrigerated display cabinets: supporting resource efficiency in the retail refrigeration sector. Energy Procedia. 123, pp. 70-75. https://doi.org/10.1016/j.egypro.2017.07.235
Non-equilibrium gas-liquid transition model
Chaer, I, Librovich, BV, Nowakowski, AF and Tassou, SA (2007). Non-equilibrium gas-liquid transition model. Sixth International Congress on Industrial Applied Mathematics (ICIAM07) and GAMM Annual Meeting. Zurich Dec 2007 London South Bank University. https://doi.org/10.1002/pamm.200700233
Refrigerant emissions and leakage prevention across Europe - Results from the RealSkillsEurope project
Koronaki, IP, Cowan, D, Maidment, GG, Beerrnan, K, Schreurs, M, Kaar, K, Chaer, I, Gontarz, G, Christodoulaki, RI and Cazauran, X (2012). Refrigerant emissions and leakage prevention across Europe - Results from the RealSkillsEurope project. Energy. 45 (1), pp. 71 - 80. https://doi.org/10.1016/j.energy.2012.05.040
UK Centre for Efficient and Renewable Energy in Buildings (CEREB)- Lessons Learned After 5 Years of Running
Yebiyo, M, Chaer, I, Shatha, H, Ye, Z and Dunn, A (2016). UK Centre for Efficient and Renewable Energy in Buildings (CEREB)- Lessons Learned After 5 Years of Running. 9th International Conference on Thermal Engineering: Theory and Applications. Abu Dhabi, UAE 24 - 26 Mar 2016 London South Bank University.
Alternative Heat Transfer Fluid in Heating Systems-Energy Results from a Real Case Study
Yebiyo, M, Chaer, I, Shatha, H, Ye, Z, Peter, S and Kadir, D (2016). Alternative Heat Transfer Fluid in Heating Systems-Energy Results from a Real Case Study. 9th International Conference on Thermal Engineering: Theory and Applications. Abu Dhabi, UAE 24 - 26 Mar 2016
Experimental study and flow visualization of Fe2O3/kerosene in glass oscillating heat pipes
Goshayeshi, HR and Chaer, I (2016). Experimental study and flow visualization of Fe2O3/kerosene in glass oscillating heat pipes. Applied Thermal Engineering. 103, pp. 1213-1218. https://doi.org/10.1016/j.applthermaleng.2016.04.109
Simulation of the heat recovery use of R744 systems in a supermarket
Colombo, I, Maidment, GG, Chaer, I and Paurine, A (2016). Simulation of the heat recovery use of R744 systems in a supermarket. 12th IIR Gustav Lorentzen Natural Working Fluids Conference. Edinburgh, UK 21 - 24 Aug 2016 IIR. https://doi.org/10.18462/iir.gl.2016.1180
DEVELOPING CIRCULAR ECONOMY FOR THE RETAIL REFRIGERATION INDUSTRY: HOW FINANCIAL INCENTIVES COULD INFLUENCE REMANUFACTURiNG OF REFRIGERATED DISPLAY CABINETS IN THE UK
Muranko, Z, Andrews, D, Chaer, I, Newton, EJ, Proudman, P and Longhurst, M (2016). DEVELOPING CIRCULAR ECONOMY FOR THE RETAIL REFRIGERATION INDUSTRY: HOW FINANCIAL INCENTIVES COULD INFLUENCE REMANUFACTURiNG OF REFRIGERATED DISPLAY CABINETS IN THE UK. Sustainable Innovation 2016 21st International Conference ‘Circular Economy’ Innovation & Design. University for the Creative Arts Epsom, Surrey, UK 07 - 08 Nov 2016
HARNESSING DAYLIGHTING AND SOLAR GAINS AS SUSTAINABLE ARCHITECTURAL DESIGNMETHODSIN MIXED-USE DEVELOPMENTS IN LAGOS, NIGERIA.
Mahmoudi Saber, E., Chaer, I. and Ekpeti, B. (2015). HARNESSING DAYLIGHTING AND SOLAR GAINS AS SUSTAINABLE ARCHITECTURAL DESIGNMETHODSIN MIXED-USE DEVELOPMENTS IN LAGOS, NIGERIA. CIBSE Technical Symposium. London 16 - 17 Apr 2015 CIBSE.
Comparison of copper and glass oscillating heat pipes with Fe2O3 under magnetic field.
Goshayeshi, HR and Chaer, I (2015). Comparison of copper and glass oscillating heat pipes with Fe2O3 under magnetic field. International Journal of Low-Carbon Technologies. 11 (4), pp. 455- 459. https://doi.org/10.1093/ijlct/ctv021
Ground source heat pumps and their interactions with underground railway tunnels in an urban environment: A review
Revesz, A, Chaer, I, Thompson, J, Mavroulidou, M, Gunn, MJ and Maidment, GG (2015). Ground source heat pumps and their interactions with underground railway tunnels in an urban environment: A review. Applied Thermal Engineering. 93, pp. 147 - 154. https://doi.org/10.1016/j.applthermaleng.2015.09.011
Estimation of Cooling Energy Demand and Carbon Emissions from Urban Buildings using a Quasi-dynamic Model
Cowan, D, Maidment, GG and Chaer, I (2014). Estimation of Cooling Energy Demand and Carbon Emissions from Urban Buildings using a Quasi-dynamic Model. ASHRAE 2014 Winter Conference. New York city, USA 18 - 22 Jan 2014 London South Bank University.
A Carbon Footprint Study and a Life Cycle Assessment of an identical Refrigerated Display Cabinet: comparative analysis of the respective ratios of embodied and operational impacts
Bibalou, D, Andrews, D, Chaer, I, Maidment, GG and Longhurst, M (2014). A Carbon Footprint Study and a Life Cycle Assessment of an identical Refrigerated Display Cabinet: comparative analysis of the respective ratios of embodied and operational impacts. 4th International Conference on Life Cycle Approaches. Lille, France 05 - 06 Nov 2014 Forum for Sustainability Through Life Cycle Innovation.
Carbon dioxide refrigeration with heat recovery for supermarkets
Colombo, I, Maidment, GG, Chaer, I and Missenden, JM (2012). Carbon dioxide refrigeration with heat recovery for supermarkets. International Journal of Low-Carbon Technologies. 9 (1), pp. 38-44. https://doi.org/10.1093/ijlct/cts040
REAL Zero – Reducing refrigerant emissions & leakage- feedback from the IOR Project
Cowan, D, Gartshore, J, Christina, F, Chaer, I and Maidment, GG (2011). REAL Zero – Reducing refrigerant emissions & leakage- feedback from the IOR Project. Proceedings of the Institute of Refrigeration.
Modelling and performance evaluation of a low-temperature ammonia-water absorption refrigeration system
Ge, YT, Tassou, SA and Chaer, I (2009). Modelling and performance evaluation of a low-temperature ammonia-water absorption refrigeration system. International Journal of Low-Carbon Technologies. 4 (2), pp. 68 - 77. https://doi.org/10.1093/ijlct/ctp015
Trigeneration in food retail: An energetic, economic and environmental evaluation for a supermarket application; Applied Thermal Engineering
Sugiartha, N, Tassou, SA, Chaer, I and Marriott, D (2007). Trigeneration in food retail: An energetic, economic and environmental evaluation for a supermarket application; Applied Thermal Engineering. Applied Thermal Engineering. 29 (13), pp. 2624-2632. https://doi.org/10.1016/j.applthermaleng.2008.11.018
Heat transfer and pressure drop of ice slurries in plate heat exchangers
Bellas, J, Chaer, I and Tassou, SA (2002). Heat transfer and pressure drop of ice slurries in plate heat exchangers. Applied Thermal Engineering. 22 (7), pp. 721 - 732. https://doi.org/10.1016/S1359-4311(01)00126-0