Mechanical Engineering and Design

Type	Division
School	Engineering

Latest research outputs

Sort by Date Title

Evaluation of low temperature waste heat as a low carbon heat resource in the UK

G. Davies, H. Lagoeiro, H. Turnell, M. Wegner, A. Foster, J. Evans, A. Revesz, A. Leiper, K. Smyth, J. Hamilton, H. Cooke and G. Maidment (2023). Evaluation of low temperature waste heat as a low carbon heat resource in the UK. Applied Thermal Engineering. 232, p. 121283. https://doi.org/10.1016/j.applthermaleng.2023.121283

Journal article

Graphene nanoplatelets/Barium titanate Polymer Nanocomposite Fibril: A Remanufactured Multifunctional Material with Unprecedented Electrical, Thermomechanical and Electromagnetic Properties

Mishra, R., Goel, S., Chianella, I. and Nezhad, H. (2023). Graphene nanoplatelets/Barium titanate Polymer Nanocomposite Fibril: A Remanufactured Multifunctional Material with Unprecedented Electrical, Thermomechanical and Electromagnetic Properties. Advanced Sustainable Systems. https://doi.org/10.1002/adsu.202300177

Journal article

Bulk and Surface Contributions to Ionisation Potentials of Metal Oxides

Zhang, X., Liu, T., Zhu, L., Guan, J., Lu, Y., Keal, T. W., Buckeridge, J., Catlow, R. and Sokol, A. A. (2023). Bulk and Surface Contributions to Ionisation Potentials of Metal Oxides. Angewandte Chemie International Edition. e202308411. https://doi.org/10.1002/anie.202308411

Journal article

Overcoming the compensation of acceptors in GaN:Mg by defect complex formation

Xie, Z., Buckeridge, J., Catlow, R.C.A., Zhang, A., Keal, T.W., Sherwood, P., Lu, Y., Woodley, S.M. and Sokol, A.A. (2023). Overcoming the compensation of acceptors in GaN:Mg by defect complex formation. APL Materials. 11 (8), p. 080701. https://doi.org/10.1063/5.0148858

Journal article

Technical note: A freeware, equitable approach to dental topographic analysis

Morley, M.J. and Berthaume, M. (2023). Technical note: A freeware, equitable approach to dental topographic analysis. American Journal of Biological Anthropology. https://doi.org/10.1002/ajpa.24807

Journal article

Fabrication and testing of a multifunctional SiO2@ZnO core-shell nanospheres incorporated polymer coating for sustainable marine transport

Verma, J., Geng, Y., Wang, J. and Goel, S. (2023). Fabrication and testing of a multifunctional SiO2@ZnO core-shell nanospheres incorporated polymer coating for sustainable marine transport. Scientific Reports. 13, p. 12321. https://doi.org/10.1038/s41598-023-39423-9

Journal article

Describing whisker morphology of the Carnivora

Dougill, G., Brassey, C.A., Starostin, E., Andrews, H., Kitchener, A., van der Heijden, G.H.M., Goss, G. and Grant, R. (2023). Describing whisker morphology of the Carnivora. Journal of morphology. 284 (9), p. e21628. https://doi.org/10.1002/jmor.21628

Journal article

Mechanism of material removal in tungsten carbide-cobalt alloy during chemistry enhanced shear thickening polishing

Wang, J., Tang, T., Goel, S., Zhou, Y., Dai, Y., Wang, J., He, Q., Yuan, J. and Lyu, B. (2023). Mechanism of material removal in tungsten carbide-cobalt alloy during chemistry enhanced shear thickening polishing . Journal of Materials Research and Technology. 25, pp. 6865-6879. https://doi.org/10.1016/j.jmrt.2023.07.112

Journal article

Driving success towards zero carbon energy targets for UK's Local Authorities

Turnell, H., Marques, C., Jones, P., Dunham, C., Revesz, A. and Maidment, G. (2023). Driving success towards zero carbon energy targets for UK's Local Authorities. International Journal of Sustainable Energy Planning and Management. 38, p. 38. https://doi.org/10.54337/ijsepm.7548

Journal article

Surface polishing and modification of Ti-6Al-4V alloy by shear thickening polishing

Wang, J., Zhou, Y., Qiao, Z., Goel, S., Wang, J., Wang, X., Chen, H., Yuan, J. and Lyu, B. (2023). Surface polishing and modification of Ti-6Al-4V alloy by shear thickening polishing. Surface & Coatings Technology. 468, p. 129771. https://doi.org/10.1016/j.surfcoat.2023.129771

Journal article

Quantum computing and materials science: A practical guide to applying quantum annealing to the configurational analysis of materials

Camino, B., Buckeridge, J., Warburton, P., Kendon, V. and Woodley, S. (2023). Quantum computing and materials science: A practical guide to applying quantum annealing to the configurational analysis of materials. Journal of Applied Physics. 133 (22). https://doi.org/10.1063/5.0151346

Journal article

Effects of Size on Water Vapour Absorption and Regeneration in Lithium chloride nanocrystals

Prakash, A., Katiyar, N.Ku., Suarez-Villagran, M., Miller, J., Machado Jr., L., Tiwary, C.S., Biswas, K. and Chattopadhyay, K. (2023). Effects of Size on Water Vapour Absorption and Regeneration in Lithium chloride nanocrystals. Materials Today Communications. https://doi.org/10.1016/j.mtcomm.2023.106388

Journal article

Stand Up for Inclusive Public Services: An illustrated guide and case studies

Kashyap, M. (2023). Stand Up for Inclusive Public Services: An illustrated guide and case studies. London, United Kingdom Action Aid UK.

Book

Transforming Nanomaterial Synthesis with Flow Chemistry

Munyebvu, N., Nette, J., Stavrakis, S., Howes, P. and deMello, A.J. (2023). Transforming Nanomaterial Synthesis with Flow Chemistry. CHIMIA. 77 (5), p. 312. https://doi.org/10.2533/chimia.2023.312

Journal article

Low electric field induction in BaTiO3-epoxy nanocomposites

Misra, R.K., Li, D., Chianella, I., Goel, S., Lotfian, S. and Nezhad, H.Y. (2023). Low electric field induction in BaTiO3-epoxy nanocomposites. Functional Composite Materials. 4 (6), pp. 023-0043. https://doi.org/10.1186/s42252-023-00043-1

Journal article

Additive Manufacturing and Physicomechanical Characteristics of PEGDA Hydrogels: Recent Advances and Perspective for Tissue Engineering

Khalili, M.H., Zhang, R., Wilson, S., Goel, S., Impey, S.A. and Aria, A.I. (2023). Additive Manufacturing and Physicomechanical Characteristics of PEGDA Hydrogels: Recent Advances and Perspective for Tissue Engineering. Polymers. 15 (10), p. 2341. https://doi.org/10.3390/polym15102341

Journal article

Nanostructured Al2O3/Graphene Additive in Bio-Based Lubricant: A Novel Approach to Improve Engine Performance

Hettiarachchi, S., Bowen, D.J., Kershaw, M, Baragau, I., Nicolaev, A and Kellici, S. (2023). Nanostructured Al2O3/Graphene Additive in Bio-Based Lubricant: A Novel Approach to Improve Engine Performance. Tribology International . 186, p. 108619. https://doi.org/10.1016/j.triboint.2023.108619

Journal article

Patterns of load distribution among the legs in small water striders during standing and striding

Meshkani, J., Rajabi, H., Kovalev, A. and Gorb, S. N. (2023). Patterns of load distribution among the legs in small water striders during standing and striding. Journal of Zoology. 320 (2), pp. 84-95. https://doi.org/10.1111/jzo.13066

Journal article

Microscopic stress analysis of nanoscratch induced sub-surface damage in a single-crystal silicon wafer

Huang, N., Zhou, P. and Goel, S. (2023). Microscopic stress analysis of nanoscratch induced sub-surface damage in a single-crystal silicon wafer. Precision Engineering. https://doi.org/10.1016/j.precisioneng.2023.04.006

Journal article

Double‐spirals offer the development of pre‐programmable modular metastructures

Jafarpour, M., Gorb, S.N. and Rajabi, H. (2023). Double‐spirals offer the development of pre‐programmable modular metastructures. Advanced Engineering Materials. 25 (13), p. 2300102. https://doi.org/10.1002/adem.202300102

Journal article

In Situ Reconfigurable Continuum Robot with Varying Curvature Enabled by Programmable Tensegrity Building Blocks

Zhang, J., Shi, J., Huang, J., Wu, Q., Zhao, Y., Yang, J., Rajabi, H., Wu, Z., Peng, H. and Wu, J. (2023). In Situ Reconfigurable Continuum Robot with Varying Curvature Enabled by Programmable Tensegrity Building Blocks. Advanced Intelligent Systems. 5 (7), p. 2300048. https://doi.org/10.1002/aisy.202300048

Journal article

A Guiding Framework for Process Parameter Optimisation of Thermal Spraying

Venkatachalapathy, V., Kumar, N., Matthews, A., Endrino, J. and Goel, S. (2023). A Guiding Framework for Process Parameter Optimisation of Thermal Spraying. Coatings. 13 (4), p. 713. https://doi.org/10.3390/coatings13040713

Journal article

Mechanical Behavior of 3D Printed Poly(ethylene glycol) Diacrylate Hydrogels in Hydrated Conditions Investigated Using Atomic Force Microscopy

Khalili, M., Panchal, V., Dulebo, A., Hawi, S., Zhang, R., Wilson, S., Dossi, E., Goel, S., Impey, S.A. and Aria, A. (2023). Mechanical Behavior of 3D Printed Poly(ethylene glycol) Diacrylate Hydrogels in Hydrated Conditions Investigated Using Atomic Force Microscopy. ACS Applied Polymer Materials. 5 (4), p. 3034. https://doi.org/10.1021/acsapm.3c00197

Journal article

Outstanding visible light photocatalysis by nano-TiO2 hybrids with nitrogen-doped carbon quantum dots and/or reduced graphene oxide

Baragau, I., Buckeridge, J., Nguyen, K., Heil, T, Sajjad, T., Thomson, S., Rennie, A., Morgan, D., Power, N., Nicolae, S., Titirici, M., Dunn, S. and Kellici, S. (2023). Outstanding visible light photocatalysis by nano-TiO2 hybrids with nitrogen-doped carbon quantum dots and/or reduced graphene oxide. Journal of Materials Chemistry A. https://doi.org/10.1039/D2TA09586F

Journal article

Phase prediction and experimental realisation of a new high entropy alloy using machine learning

Singh, S., Kumar, N., Goel, S. and Joshi, S.N. (2023). Phase prediction and experimental realisation of a new high entropy alloy using machine learning. Scientific Reports. 13, p. 4811. https://doi.org/10.1038/s41598-023-31461-7

Journal article

Microfluidic synthesis of monodisperse and size-tunable CsPbBr3 supraparticles

Nette, J., Montanarella, F., Zhu, C., Sekh, T.V., Boehme, S.C., Bodnarchuk, M.I., Rainò, G., Howes, P., Kovalenko, M.V. and deMello, A.J. (2023). Microfluidic synthesis of monodisperse and size-tunable CsPbBr3 supraparticles. Chemical Communications. https://doi.org/10.1039/D3CC00093A

Journal article

Control over Multi-Scale Self-Organization-Based Processes under the Extreme Tribological Conditions of Cutting through the Application of Complex Adaptive Surface-Engineered Systems

Fox-Rabinovich, G., Gershman, I., Goel, S. and Endrino, J.L. (2023). Control over Multi-Scale Self-Organization-Based Processes under the Extreme Tribological Conditions of Cutting through the Application of Complex Adaptive Surface-Engineered Systems. Lubricants. 11 (3), p. 106. https://doi.org/10.3390/lubricants11030106

Journal article

Thermo-physical characteristics of 3C-SiC structure subjected to microwave exposure: A molecular dynamics study

Dora, T. L., Owhal, A., Roy, T., Belgamwar, S., Goel, S., Nezhad, H. and Mishra, R. (2023). Thermo-physical characteristics of 3C-SiC structure subjected to microwave exposure: A molecular dynamics study . Materials Today Communications. https://doi.org/10.1016/j.mtcomm.2023.105693

Journal article

Meeting Net Zero Carbon Emission Targets: A case study tailored to local industry

De Almeida Marques, A., Turnell, H., Jones, P., Dunham, C., Fox, M., Revesz, A. and Maidment, G. (2023). Meeting Net Zero Carbon Emission Targets: A case study tailored to local industry. 2023 ASHRAE winter conference. Atlanta, Georgia, USA 04 - 08 Feb 2023

Conference paper

Assessing the performance gap of two dynamic thermal modelling software tools when comparing with real-time data in relation to thermal loss

Salehi, B., Andrews, D., Chaer, I., Gillich, A. and Newton, E. (2023). Assessing the performance gap of two dynamic thermal modelling software tools when comparing with real-time data in relation to thermal loss. Building Services Engineering Research and Technology. pp. 1-14. https://doi.org/10.1177/01436244231153839

Journal article

Carbon emissions from refrigeration used in the UK food industry

Foster, A., Brown, T. and Evans, J. (2023). Carbon emissions from refrigeration used in the UK food industry. International Journal of Refrigeration. 150, pp. 297-303. https://doi.org/10.1016/j.ijrefrig.2023.01.022

Journal article

Raw Data - A Freeware, Equitable Approach to Dental Topographic Analysis

Morley, M. and Berthaume, M. (2023). Raw Data - A Freeware, Equitable Approach to Dental Topographic Analysis. London South Bank University. https://doi.org/10.18744/lsbu.93322

Dataset

Research on development of aspheric diffractive optical element for mid-infrared imaging

Khatri, N., Berwal, S., Manjunath, M., Singh, B., Mishra, V. and Goel, S. (2023). Research on development of aspheric diffractive optical element for mid-infrared imaging. Infrared Physics & Technology. 129, p. 104582. https://doi.org/10.1016/j.infrared.2023.104582

Journal article

Recent Progress and Perspective on Batteries made from Nuclear Waste

Kumar, N. and Goel, S. (2023). Recent Progress and Perspective on Batteries made from Nuclear Waste. Nuclear Science and Techniques. https://doi.org/10.1007/s41365-023-01189-0

Journal article

Nanoindentation Response of 3D Printed PEGDA Hydrogels in a Hydrated Environment

Khalili, M.H., Williams, C.J., Micallef, C., Duarte-Martinez, F., Afsar, A., Zhang, R., Wilson, S., Dossi, E., Impey, S.A., Goel, S. and Aria, A.I. (2023). Nanoindentation Response of 3D Printed PEGDA Hydrogels in a Hydrated Environment. ACS Applied Polymer Materials. 5 (2), pp. 1180-1190. https://doi.org/10.1021/acsapm.2c01700

Journal article

A Preprogrammable Continuum Robot Inspired by Elephant Trunk for Dexterous Manipulation

Zhang, J., Li, Y., Kan, Z., Yuan, Q., Rajabi, H., Wu, Z., Peng, H. and Wu, J. (2023). A Preprogrammable Continuum Robot Inspired by Elephant Trunk for Dexterous Manipulation. Soft Robotics. https://doi.org/10.1089/soro.2022.0048

Journal article

Radiation-free Microwave Technology for Breast Lesion Detection using Supervised Machine Learning Model

Rana, S., Dey, M., Loretoni, R., Duranti, M., Ghavami, M., Dudley-Mcevoy, S. and Tiberi, G. (2023). Radiation-free Microwave Technology for Breast Lesion Detection using Supervised Machine Learning Model. Tomography. 9 (1), pp. 105-129. https://doi.org/10.3390/tomography9010010

Journal article

Double-spiral: a bioinspired pre-programmable compliant joint with multiple degrees of freedom

Jafarpour, M., Gorb, S. and Rajabi Jorshari, H. (2023). Double-spiral: a bioinspired pre-programmable compliant joint with multiple degrees of freedom. Journal of The Royal Society Interface. 20 (198). https://doi.org/10.1098/rsif.2022.0757

Journal article

Nanoparticle mediated cancer cell therapy: Basic science to clinical applications

Verma, J., Warsame, C., Seenivasagam, R.K., Kumar, N., Abdel Aleem, E. and Goel, S. (2023). Nanoparticle mediated cancer cell therapy: Basic science to clinical applications. Cancer and Metastasis Reviews. https://doi.org/10.1007/s10555-023-10086-2

Journal article

Characterization of quenched MD simulated porous carbon electrodes for supercapacitors

Khaitan, A., Owhal, A., Nair, M.R., Sahoo, S., Belgamwar, S.U., Goel, S. and Roy, T. (2023). Characterization of quenched MD simulated porous carbon electrodes for supercapacitors. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.01.065

Journal article

« Previous