A comparative study of adaptive filters and linear prediction in detecting a naturally degraded bearing within a gearbox; Case Studies in Mechanical Systems and Signal Processing

Journal article


Elasha, F, Mba, D and Ruiz-Carcel, C (2015). A comparative study of adaptive filters and linear prediction in detecting a naturally degraded bearing within a gearbox; Case Studies in Mechanical Systems and Signal Processing. Case Studies in Mechanical Systems and Signal Processing. 3 (June), pp. 1-8.
AuthorsElasha, F, Mba, D and Ruiz-Carcel, C
Abstract

The diagnosis of bearing faults at the earliest stage is critical in avoiding future catastrophic failures. Many diagnostic techniques have been developed and applied in for such purposes, however, these traditional diagnostic techniques are not always successful when the bearing fault occurs within a gearbox where the vibration response is complex; under such circumstances it may be necessary to separate the bearing vibration signature.

This paper presents a comparative study of four different techniques for bearing signature separation within a gearbox. The effectiveness of these individual techniques were compared in diagnosing a bearing defect within a gearbox employed for endurance tests of an aircraft control system. The techniques investigated include the least mean square (LMS), self-adaptive noise cancellation (SANC) and the fast block LMS (FBLMS). All three techniques were applied to measured vibration signals taken throughout the endurance test. In conclusion it is shown that the LMS technique detected the bearing fault earliest.

Year2015
JournalCase Studies in Mechanical Systems and Signal Processing
Journal citation3 (June), pp. 1-8
PublisherLondon South Bank University
Digital Object Identifier (DOI)doi:10.1016/j.csmssp.2015.11.001
Publication dates
Print28 Nov 2015
Publication process dates
Deposited28 Jul 2016
Accepted17 Nov 2015
Publisher's version
License
CC BY-NC-ND 4.0
Permalink -

https://openresearch.lsbu.ac.uk/item/8758q

  • 2
    total views
  • 0
    total downloads
  • 2
    views this month
  • 0
    downloads this month

Related outputs

An analysis of civil aviation industry safety needs for the introduction of liquid hydrogen propulsion technology
Benson, CM, Ingram, JM, Battersby, PA, Mba, D, Sethi, V and Rolt, AM (2019). An analysis of civil aviation industry safety needs for the introduction of liquid hydrogen propulsion technology. TURBO EXPO Turbomachinery Technical Conference & Exposition. Phoenix AZ, USA 18 - 20 Jun 2019
A comparative study of adaptive filters in detecting a naturally degraded bearing within a gearbox
Elasha, F, Mba, D and Ruiz-Carcel, C (2016). A comparative study of adaptive filters in detecting a naturally degraded bearing within a gearbox. Case Studies in Mechanical Systems and Signal Processing. 3, pp. 1-8.
A study on helicopter main gearbox planetary bearing fault diagnosis
Zhou, L, Duan, F, Corsar, M, Elasha, F and Mba, D (2017). A study on helicopter main gearbox planetary bearing fault diagnosis. Applied Acoustics.
Bearing signal separation of commercial helicopter main gearbox
Elasha, F, Greaves, M and Mba, D (2016). Bearing signal separation of commercial helicopter main gearbox. Procedia CIRP. 59, pp. 111-115.
A hybrid prognostic methodology for tidal turbine gearboxes
Elasha, F, Mba, D, Togneri, M, Masters, I and Teixeira, JA (2017). A hybrid prognostic methodology for tidal turbine gearboxes. Renewable Energy. 114, pp. 1051-1061.
Canonical variable analysis and long short-term memory for fault diagnosis and performance estimation of a centrifugal compressor
Li, X, Duan, F, Loukopoulos, P, Bennett, I and Mba, D (2018). Canonical variable analysis and long short-term memory for fault diagnosis and performance estimation of a centrifugal compressor. Control Engineering Practice. 72, pp. 177-191.
Identification of fatigue damage evolution in 316L stainless steel using Acoustic Emission and Digital Image Correlation
Tanvir, F, Sattar, TP, Mba, D, Edwards, G, Eren, E and Lage, Y (2018). Identification of fatigue damage evolution in 316L stainless steel using Acoustic Emission and Digital Image Correlation. MATEC Web of Conference. Poitiers Futuroscope, France 27 May - 01 Jun 2018 London South Bank University. doi:10.1051/matecconf/201816522007
Dealing with missing data for prognostic purposes
Loukopoulos, P, Sampath, S, Pilidis, P, Zolkiewski, G, Bennett, I, Duan, F and Mba, D (2016). Dealing with missing data for prognostic purposes. Prognostics and System Health Management Conference. Chengdu, China 19 - 21 Oct 2016 London South Bank University. doi:10.1109/PHM.2016.7819934
Reciprocating compressor prognostics of an instantaneous failure mode utilising temperature only measurements
Loukopoulos, P, Zolkiewski, G, Bennet, I, Sampath, S, Pilidis, P, Duan, F, Sattar, TP and Mba, D (2017). Reciprocating compressor prognostics of an instantaneous failure mode utilising temperature only measurements. Applied Acoustics.
Combining Canonical Variate Analysis, Probability Approach and Support Vector Regression for Failure Time Prediction
Xiaochuan, L, Duan, F, Bennett, I and Mba, D (2017). Combining Canonical Variate Analysis, Probability Approach and Support Vector Regression for Failure Time Prediction. 2017 International Conference on Sensing, Diagnostics, Prognostics and Control. Shangai, China 16 - 18 Aug 2017 London South Bank University.
Using empirical mode decomposition scheme for helicopter main gearbox bearing defect identification
Duan, F, Corsar, M and Mba, D (2016). Using empirical mode decomposition scheme for helicopter main gearbox bearing defect identification. Prognostics and System Health Management Conference (PHM-Chengdu), 2016. Chengdu, China 19 - 21 Oct 2016 London South Bank University. doi:10.1109/PHM.2016.7819829
Using independent component analysis scheme for helicopter main gearbox bearing defect identification
Duan, F, Corsar, M, Zhou, L and Mba, D (2017). Using independent component analysis scheme for helicopter main gearbox bearing defect identification. 2017 IEEE International Conference on Prognostics and Health Management (ICPHM). Texas, USA 19 - 21 Jun 2017 London South Bank University. pp. 252-259 doi:10.1109/ICPHM.2017.7998337
Rotating machine prognostics using system-level models
Li, X, Duan, F, Mba, D and Bennett, I (2016). Rotating machine prognostics using system-level models. 2016 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2016) 2016 World Congress on Engineering Asset Management (WCEAM 2016). Jiuzhaigou, Sichuan, China 25 - 28 Jul 2016 London South Bank University.
Multidimensional prognostics for rotating machinery: A review
Li, X, Duan, F, Mba, D and Bennett, I (2017). Multidimensional prognostics for rotating machinery: A review. Advances in Mechanical Engineering. 9 (2).
A comparative study of helicopter planetary bearing diagnosis with vibration and acoustic emission data
Zhou, L, Duan, F, Mba, D and Faris, E (2017). A comparative study of helicopter planetary bearing diagnosis with vibration and acoustic emission data. 2017 IEEE International Conference on Prognostics and Health Management (ICPHM). Dallas, TX, USA 19 - 21 Jun 2017 London South Bank University. pp. 246-251 doi:10.1109/ICPHM.2017.7998336
Helicopter gearbox bearing fault detection using separation techniques and envelope analysis
Zhou, L, Duan, F, Mba, D, Corsar, M, Greaves, M, Sampath, S and Elasha, F (2016). Helicopter gearbox bearing fault detection using separation techniques and envelope analysis. Prognostics and System Health Management Conference (PHM-Chengdu), 2016. Chengdu, China 19 - 21 Oct 2016 London South Bank University. doi:10.1109/PHM.2016.7819888
Wireless Acoustic Emission Transmission System Designed for Fault Detection of Rotating Machine
Zhou, L, Duan, F and Mba, D (2016). Wireless Acoustic Emission Transmission System Designed for Fault Detection of Rotating Machine. Lecture Notes in Networks and Systems. 4, pp. 201-207.
Reciprocating compressor prognostics
Loukopoulos, P, Sampath, S, Plidis, P, Zolkiewski, G, Bennett, I, Duan, F, Sattar, TP and Mba, D (2017). Reciprocating compressor prognostics. CMSM 2017 7th International Congress Design and Modelling of Mechanical Systems. Hammamet, Tunisia 27 - 29 Mar 2017 London South Bank University.
Fire suppression systems in aircraft: Their past, present & future
Benson, CM, Fernandez-Cerezo, G, Holborn, PG and Mba, D (2016). Fire suppression systems in aircraft: Their past, present & future. Fire Investigation. 1 (3), pp. 34-41.
Helicopter Main Gearbox Bearing Defect Identification using Vibration and Acoustic Emission Techniques
Duan, F, Elasha, F, Greaves, M and Mba, D (2016). Helicopter Main Gearbox Bearing Defect Identification using Vibration and Acoustic Emission Techniques. P2016 IEEE International Conference on Prognostics and Health Management (ICPHM). Carleton University Ottawa, ON, Canada 20 - 22 Jun 2016 IEEE. doi:https://doi.org/10.1109/ICPHM.2016.7542856
Low Speed Bearing Condition Monitoring – A Case Study
Duan, F, Nze, I and Mba, D (2016). Low Speed Bearing Condition Monitoring – A Case Study. Proceedings of 2016 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2016) and 2016 World Congress on Engineering Asset Management (WCEAM2016). Jiuzhaigou, Sichuan, China 25 - 28 Jul 2016 London South Bank University.
Challenges for the development of EFFICIENT - An Environmentally Friendly Fire Suppression System for Cargo using Innovative Green Technology
Fernandez-Cerezo, G, Benson, CM, Holborn, PG and Mba, D (2016). Challenges for the development of EFFICIENT - An Environmentally Friendly Fire Suppression System for Cargo using Innovative Green Technology. Institute of Fire Engineers RE16. Birmingham Nov 2016 London South Bank University.
Canonical Variate Analysis for Performance Degradation under Faulty Conditions
Ruiz-Carcel, C, Lao, L, Cao, Y and Mba, D (2016). Canonical Variate Analysis for Performance Degradation under Faulty Conditions. Control Engineering Practice. 54, pp. 70-80.
Feasibility study on using thioether as an emergency backup lubrication system on a large helicopter main gearbox
Duan, F, Tee, S, Corsar, M, Healey, A, Kleine-Beek, W and Mba, D (2016). Feasibility study on using thioether as an emergency backup lubrication system on a large helicopter main gearbox. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Helicopter Main Gearbox Bearing Defect Identification with Acoustic Emission Techniques
Duan, F, Elasha, F, Mba, D and Bennett, I (2016). Helicopter Main Gearbox Bearing Defect Identification with Acoustic Emission Techniques. IEEE International Conference on Prognostics and Health Management. Ottawa, Canada 20 - 22 Jun 2016 London South Bank University.
Induction Motor Parameter Estimation Using Sparse Grid Optimization Algorithm
Duan, F, Zivanovic, R, Al-Sarawi, S and Mba, D (2016). Induction Motor Parameter Estimation Using Sparse Grid Optimization Algorithm. IEEE Transactions on Industrial Informatics. PP (99).
A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetary gearbox
Elasha, F, Greaves, M, Mba, D and Duan, F (2016). A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetary gearbox. Applied Acoustics. 115, pp. 181-195.