A comparative study of adaptive filters in detecting a naturally degraded bearing within a gearbox

Journal article


Elasha, F, Mba, D and Ruiz-Carcel, C (2016). A comparative study of adaptive filters in detecting a naturally degraded bearing within a gearbox. Case Studies in Mechanical Systems and Signal Processing. 3, pp. 1-8. https://doi.org/10.1016/j.csmssp.2015.11.001
AuthorsElasha, F, Mba, D and Ruiz-Carcel, C
Abstract

© 2015. The diagnosis of bearing faults at the earliest stage is critical in avoiding future catastrophic failures. Many diagnostic techniques have been developed and applied in for such purposes, however, these traditional diagnostic techniques are not always successful when the bearing fault occurs within a gearbox where the vibration response is complex; under such circumstances it may be necessary to separate the bearing vibration signature.This paper presents a comparative study of four different techniques for bearing signature separation within a gearbox. The effectiveness of these individual techniques were compared in diagnosing a bearing defect within a gearbox employed for endurance tests of an aircraft control system. The techniques investigated include the least mean square (LMS), self-adaptive noise cancellation (SANC) and the fast block LMS (FBLMS). All three techniques were applied to measured vibration signals taken throughout the endurance test. In conclusion it is shown that the LMS technique detected the bearing fault earliest.

Year2016
JournalCase Studies in Mechanical Systems and Signal Processing
Journal citation3, pp. 1-8
PublisherElsevier
ISSN2351-9886
Digital Object Identifier (DOI)https://doi.org/10.1016/j.csmssp.2015.11.001
Publication dates
Print01 Jun 2016
Publication process dates
Deposited12 Nov 2018
Accepted17 Nov 2015
Publisher's version
License
File Access Level
Open
Permalink -

https://openresearch.lsbu.ac.uk/item/873y1

Download files


Publisher's version
A comparative study of adaptive filters in detecting a naturally.pdf
License: CC BY-NC-ND 4.0
File access level: Open

  • 127
    total views
  • 228
    total downloads
  • 1
    views this month
  • 4
    downloads this month

Export as

Related outputs

Identification of Fatigue Damage Evaluation using Entropy of Acoustic Emission Waveform
Santo, F., Sattar, T., Mba, D. and Edwards, G. (2019). Identification of Fatigue Damage Evaluation using Entropy of Acoustic Emission Waveform. SN Applied Sciences. 2 (138). https://doi.org/10.1007/s42452-019-1694-7
An analysis of civil aviation industry safety needs for the introduction of liquid hydrogen propulsion technology
Benson, CM, Ingram, JM, Battersby, PA, Mba, D, Sethi, V and Rolt, AM (2019). An analysis of civil aviation industry safety needs for the introduction of liquid hydrogen propulsion technology. TURBO EXPO Turbomachinery Technical Conference & Exposition. Phoenix AZ, USA 18 - 20 Jun 2019
Using frequency domain analysis techniques for diagnosis of planetary bearing defect in a CH-46E helicopter aft gearbox
Zhou, L., Duan, F., Mba, D., Wang, W. and Ojolo, S. (2018). Using frequency domain analysis techniques for diagnosis of planetary bearing defect in a CH-46E helicopter aft gearbox. Engineering Failure Analysis. 92, pp. 71-83. https://doi.org/10.1016/j.engfailanal.2018.04.051
Canonical variable analysis and long short-term memory for fault diagnosis and performance estimation of a centrifugal compressor
Li, X, Duan, F, Loukopoulos, P, Bennett, I and Mba, D (2018). Canonical variable analysis and long short-term memory for fault diagnosis and performance estimation of a centrifugal compressor. Control Engineering Practice. 72, pp. 177-191. https://doi.org/10.1016/j.conengprac.2017.12.006
Identification of fatigue damage evolution in 316L stainless steel using Acoustic Emission and Digital Image Correlation
Tanvir, F, Sattar, TP, Mba, D, Edwards, G, Eren, E and Lage, Y (2018). Identification of fatigue damage evolution in 316L stainless steel using Acoustic Emission and Digital Image Correlation. MATEC Web of Conference. Poitiers Futuroscope, France 27 May - 01 Jun 2018 London South Bank University. https://doi.org/10.1051/matecconf/201816522007
Multidimensional prognostics for rotating machinery: A review
Li, X, Duan, F, Mba, D and Bennett, I (2017). Multidimensional prognostics for rotating machinery: A review. Advances in Mechanical Engineering. 9 (2). https://doi.org/10.1177/1687814016685004
Reciprocating compressor prognostics
Loukopoulos, P, Sampath, S, Plidis, P, Zolkiewski, G, Bennett, I, Duan, F, Sattar, TP and Mba, D (2017). Reciprocating compressor prognostics. CMSM 2017 7th International Congress Design and Modelling of Mechanical Systems. Hammamet, Tunisia 27 - 29 Mar 2017
A comparative study of helicopter planetary bearing diagnosis with vibration and acoustic emission data
Zhou, L, Duan, F, Mba, D and Faris, E (2017). A comparative study of helicopter planetary bearing diagnosis with vibration and acoustic emission data. 2017 IEEE International Conference on Prognostics and Health Management (ICPHM). Dallas, TX, USA 19 - 21 Jun 2017 Institute of Electrical and Electronics Engineers (IEEE). pp. 246-251 https://doi.org/10.1109/ICPHM.2017.7998336
Using independent component analysis scheme for helicopter main gearbox bearing defect identification
Duan, F, Corsar, M, Zhou, L and Mba, D (2017). Using independent component analysis scheme for helicopter main gearbox bearing defect identification. 2017 IEEE International Conference on Prognostics and Health Management (ICPHM). Texas, USA 19 - 21 Jun 2017 Institute of Electrical and Electronics Engineers (IEEE). pp. 252-259 https://doi.org/10.1109/ICPHM.2017.7998337
A hybrid prognostic methodology for tidal turbine gearboxes
Elasha, F, Mba, D, Togneri, M, Masters, I and Teixeira, JA (2017). A hybrid prognostic methodology for tidal turbine gearboxes. Renewable Energy. 114, pp. 1051-1061. https://doi.org/10.1016/j.renene.2017.07.093
Combining Canonical Variate Analysis, Probability Approach and Support Vector Regression for Failure Time Prediction
Xiaochuan, L, Duan, F, Bennett, I and Mba, D (2017). Combining Canonical Variate Analysis, Probability Approach and Support Vector Regression for Failure Time Prediction. 2017 International Conference on Sensing, Diagnostics, Prognostics and Control. Shangai, China 16 - 18 Aug 2017
Reciprocating compressor prognostics of an instantaneous failure mode utilising temperature only measurements
Loukopoulos, P, Zolkiewski, G, Bennet, I, Sampath, S, Pilidis, P, Duan, F, Sattar, TP and Mba, D (2017). Reciprocating compressor prognostics of an instantaneous failure mode utilising temperature only measurements. Applied Acoustics. 147, pp. 77-86. https://doi.org/10.1016/j.apacoust.2017.12.003
A study on helicopter main gearbox planetary bearing fault diagnosis
Zhou, L, Duan, F, Corsar, M, Elasha, F and Mba, D (2017). A study on helicopter main gearbox planetary bearing fault diagnosis. Applied Acoustics. https://doi.org/10.1016/j.apacoust.2017.12.004
Feasibility study on using thioether as an emergency backup lubrication system on a large helicopter main gearbox
Duan, F, Tee, S, Corsar, M, Healey, A, Kleine-Beek, W and Mba, D (2016). Feasibility study on using thioether as an emergency backup lubrication system on a large helicopter main gearbox. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 231 (14). https://doi.org/10.1177/0954406216640573
Induction Motor Parameter Estimation Using Sparse Grid Optimization Algorithm
Duan, F, Zivanovic, R, Al-Sarawi, S and Mba, D (2016). Induction Motor Parameter Estimation Using Sparse Grid Optimization Algorithm. IEEE Transactions on Industrial Informatics. PP (99). https://doi.org/10.1109/TII.2016.2573743
Canonical Variate Analysis for Performance Degradation under Faulty Conditions
Ruiz-Carcel, C, Lao, L, Cao, Y and Mba, D (2016). Canonical Variate Analysis for Performance Degradation under Faulty Conditions. Control Engineering Practice. 54, pp. 70-80. https://doi.org/10.1016/j.conengprac.2016.05.018
Helicopter Main Gearbox Bearing Defect Identification using Vibration and Acoustic Emission Techniques
Duan, F, Elasha, F, Greaves, M and Mba, D (2016). Helicopter Main Gearbox Bearing Defect Identification using Vibration and Acoustic Emission Techniques. P2016 IEEE International Conference on Prognostics and Health Management (ICPHM). Carleton University Ottawa, ON, Canada 20 - 22 Jun 2016 Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.1109/ICPHM.2016.7542856
Helicopter Main Gearbox Bearing Defect Identification with Acoustic Emission Techniques
Duan, F, Elasha, F, Mba, D and Bennett, I (2016). Helicopter Main Gearbox Bearing Defect Identification with Acoustic Emission Techniques. IEEE International Conference on Prognostics and Health Management. Ottawa, Canada 20 - 22 Jun 2016 Institute of Electrical and Electronics Engineers (IEEE).
Rotating machine prognostics using system-level models
Li, X, Duan, F, Mba, D and Bennett, I (2016). Rotating machine prognostics using system-level models. 2016 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2016) 2016 World Congress on Engineering Asset Management (WCEAM 2016). Jiuzhaigou, Sichuan, China 25 - 28 Jul 2016
Low Speed Bearing Condition Monitoring – A Case Study
Duan, F, Nze, I and Mba, D (2016). Low Speed Bearing Condition Monitoring – A Case Study. Proceedings of 2016 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2016) and 2016 World Congress on Engineering Asset Management (WCEAM2016). Jiuzhaigou, Sichuan, China 25 - 28 Jul 2016
A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetary gearbox
Elasha, F, Greaves, M, Mba, D and Duan, F (2016). A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetary gearbox. Applied Acoustics. 115, pp. 181-195. https://doi.org/10.1016/j.apacoust.2016.07.026
Fire suppression systems in aircraft: Their past, present & future
Benson, CM, Fernandez-Cerezo, G, Holborn, PG and Mba, D (2016). Fire suppression systems in aircraft: Their past, present & future. Fire Investigation. 1 (3), pp. 34-41.
Helicopter gearbox bearing fault detection using separation techniques and envelope analysis
Zhou, L, Duan, F, Mba, D, Corsar, M, Greaves, M, Sampath, S and Elasha, F (2016). Helicopter gearbox bearing fault detection using separation techniques and envelope analysis. Prognostics and System Health Management Conference (PHM-Chengdu), 2016. Chengdu, China 19 - 21 Oct 2016 Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.1109/PHM.2016.7819888
Dealing with missing data for prognostic purposes
Loukopoulos, P, Sampath, S, Pilidis, P, Zolkiewski, G, Bennett, I, Duan, F and Mba, D (2016). Dealing with missing data for prognostic purposes. Prognostics and System Health Management Conference. Chengdu, China 19 - 21 Oct 2016 Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.1109/PHM.2016.7819934
Using empirical mode decomposition scheme for helicopter main gearbox bearing defect identification
Duan, F, Corsar, M and Mba, D (2016). Using empirical mode decomposition scheme for helicopter main gearbox bearing defect identification. Prognostics and System Health Management Conference (PHM-Chengdu), 2016. Chengdu, China 19 - 21 Oct 2016 Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.1109/PHM.2016.7819829
Bearing signal separation of commercial helicopter main gearbox
Elasha, F, Greaves, M and Mba, D (2016). Bearing signal separation of commercial helicopter main gearbox. Procedia CIRP. 59, pp. 111-115. https://doi.org/10.1016/j.procir.2016.09.030
Wireless Acoustic Emission Transmission System Designed for Fault Detection of Rotating Machine
Zhou, L, Duan, F and Mba, D (2016). Wireless Acoustic Emission Transmission System Designed for Fault Detection of Rotating Machine. Lecture Notes in Networks and Systems. 4, pp. 201-207. https://doi.org/10.1007/978-3-319-48725-0_19
Challenges for the development of EFFICIENT - An Environmentally Friendly Fire Suppression System for Cargo using Innovative Green Technology
Fernandez-Cerezo, G, Benson, CM, Holborn, PG and Mba, D (2016). Challenges for the development of EFFICIENT - An Environmentally Friendly Fire Suppression System for Cargo using Innovative Green Technology. Institute of Fire Engineers RE16. Birmingham Nov 2016
A comparative study of adaptive filters and linear prediction in detecting a naturally degraded bearing within a gearbox; Case Studies in Mechanical Systems and Signal Processing
Elasha, F, Mba, D and Ruiz-Carcel, C (2015). A comparative study of adaptive filters and linear prediction in detecting a naturally degraded bearing within a gearbox; Case Studies in Mechanical Systems and Signal Processing. Case Studies in Mechanical Systems and Signal Processing. 3 (June), pp. 1-8. https://doi.org/10.1016/j.csmssp.2015.11.001