Dependence of Magnetisation near Saturation on Alloying Content in Ferromagnetic Steel

Journal article


Shirkoohi, G (2015). Dependence of Magnetisation near Saturation on Alloying Content in Ferromagnetic Steel. IEEE Transactions on Magnetics. 51 (7).
AuthorsShirkoohi, G
Abstract

This paper shows that there is strong dependence of saturation magnetization on the alloying content in ferromagnetic steels. This dependence was used to determine the cross-sectional areas of the commercial non-oriented and grain-oriented silicon-iron steels. The relation between magnetization near saturation and the contents of silicon and aluminum for a large number of steel samples was experimentally obtained using an air-cored magnetizing system. The influence of the approach to magnetic saturation and its use in the determination of the cross-sectional area of electrical steel strips using the saturation magnetization method was estimated. Standard deviation (SD) of cross-sectional area obtained using the saturation magnetization method was on the order of 0.14%. SD for using conventional technique was also on the similar order of ~0.11%.

Year2015
JournalIEEE Transactions on Magnetics
Journal citation51 (7)
PublisherIEEE
ISSN1941-0069
Digital Object Identifier (DOI)doi:10.1109/TMAG.2015.2405056
Publication dates
Print01 Jul 2015
Publication process dates
Deposited14 Feb 2017
Accepted author manuscript
License
CC BY-NC-ND 4.0
Permalink -

https://openresearch.lsbu.ac.uk/item/87672

  • 0
    total views
  • 2
    total downloads
  • 0
    views this month
  • 2
    downloads this month