Mechanical Engineering and Design

Type	Division
School	Engineering

Latest research outputs

Sort by Date Title

Origins of ductile plasticity in a polycrystalline gallium arsenide during scratching: MD simulation study

Fan, P., Goel, S., Luo, X., Yan, Y., Geng, Y. and He, Y. (2021). Origins of ductile plasticity in a polycrystalline gallium arsenide during scratching: MD simulation study. Applied Surface Science. 552, p. 149489. https://doi.org/10.1016/j.apsusc.2021.149489

Journal article

In-depth microscopic characterisation of the weld faying interface revealing stress-induced metallurgical transformations during friction stir spot welding

Zlatanovi, D. L., Balos, S., Bergmann, J. P., Rasche, S., Zavašnik, J., Panchal, V., Sidjanin, L. and Goel, S. (2021). In-depth microscopic characterisation of the weld faying interface revealing stress-induced metallurgical transformations during friction stir spot welding. International Journal of Machine Tools and Manufacture. 164, p. 103716.

Journal article

Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting.

Popov, V., Fleisher, A., Muller-Kamskii, G., Shishkin, A., Katz-Demyanetz, A., Travitzky, N. and Goel, S. (2021). Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting. Scientific Reports. 11 (1), p. 2438. https://doi.org/10.1038/s41598-021-81861-w

Journal article

Using circular economy principles to recycle materials in guiding the design of a wet scrubber-reactor for indoor air disinfection from coronavirus and other pathogens.

Shishkin, A., Goel, G., Baronins, J., Ozolins, J., Hoskins, C. and Goel, S. (2021). Using circular economy principles to recycle materials in guiding the design of a wet scrubber-reactor for indoor air disinfection from coronavirus and other pathogens. Environmental technology & innovation. 22, p. 101429. https://doi.org/10.1016/j.eti.2021.101429

Journal article

Potential pathway for recycling of the paper mill sludge compost for brick making

Goel, G. (2021). Potential pathway for recycling of the paper mill sludge compost for brick making. London South Bank University. https://doi.org/10.18744/lsbu.8vz35

Dataset

Exploring the potential of heat as a service in decarbonization: Evidence needs and research gaps

Britton, J., Minas, A.M., Marques, C. and Pourmirza, Z. (2021). Exploring the potential of heat as a service in decarbonization: Evidence needs and research gaps. Energy Sources, Part B: Economics, Planning, and Policy. https://doi.org/10.1080/15567249.2021.1873460

Journal article

Easy scalable avenue of anti-bacterial nanocomposites coating containing Ag NPs prepared by cryomilling

Katiyar, N.K. and Biswas, K. (2021). Easy scalable avenue of anti-bacterial nanocomposites coating containing Ag NPs prepared by cryomilling. Materials Today Communications. 26, p. 102020. https://doi.org/10.1016/j.mtcomm.2021.102020

Journal article

Potential pathway for recycling of the paper mill sludge compost for brick making

Goel, G., Vasić, M.V., Kumar, N., Subramanian Kala, K., Pezo, M. and Dinakar, P. (2021). Potential pathway for recycling of the paper mill sludge compost for brick making. Construction and Building Materials. 278. https://doi.org/10.1016/j.conbuildmat.2021.122384

Journal article

Recycling of waste coal dust for the energy-efficient fabrication of bricks: A laboratory to industrial-scale study

Vasić, M.V., Goel, G., Vasić, M. and Radojević, Z. (2021). Recycling of waste coal dust for the energy-efficient fabrication of bricks: A laboratory to industrial-scale study. Environmental Technology and Innovation. 21. https://doi.org/10.1016/j.eti.2020.101350

Journal article

Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle

Larrañaga-Altuna, M., Zabala, A., Llavori, I., Pearce, O., Nguyen, D., Caro, J., Mescheder, Holger, Endrino, J., Goel, G., Ayre, W., Seenivasagam, R., Tripathy, D., Armstrong, Joe and Goel, S. (2021). Bactericidal surfaces: An emerging 21st-century ultra-precision manufacturing and materials puzzle. Applied Physics Reviews. 8 (2), p. 021303. https://doi.org/10.1063/5.0028844

Journal article

Measuring Infrastructure Projects’ Impact on UN SDG Global Goals: Development of an SDG Impact-Value Chain for the Infrastructure Sector based on the Triple Bottom Line

Mansell, P., Philbin, S., Broyd, T. and Nicholson, I. (2021). Measuring Infrastructure Projects’ Impact on UN SDG Global Goals: Development of an SDG Impact-Value Chain for the Infrastructure Sector based on the Triple Bottom Line. International Journal of Sustainable Society. 13 (3). https://doi.org/10.1504/IJSSOC.2021.10041358

Journal article

Delivering UN Sustainable Development Goals’ Impact on Infrastructure Projects: An Empirical Study of Senior Executives in the UK Construction Sector

Mansell, P., Philbin, S. and Konstantinou, E. (2020). Delivering UN Sustainable Development Goals’ Impact on Infrastructure Projects: An Empirical Study of Senior Executives in the UK Construction Sector. Sustainability. 12 (19), p. e7998. https://doi.org/10.3390/su12197998

Journal article

Cryomilling as environmentally friendly synthesis route to prepare nanomaterials

Kumar, N., Biswas, Krishanu and Tiwary, C. S. (2020). Cryomilling as environmentally friendly synthesis route to prepare nanomaterials. International Materials Reviews. 66 (7), pp. 493-532. https://doi.org/10.1080/09506608.2020.1825175

Journal article

The Development of a Skin Image Analysis Tool by Using Machine Learning Algorithms

Xiao, P., Zhang, Xu, Pan, Wei, Ou, Xiang, Bontozoglou, C., Chirikhina, E. and Chen, D. (2020). The Development of a Skin Image Analysis Tool by Using Machine Learning Algorithms. Cosmetics. 7 (3), p. e67. https://doi.org/10.3390/cosmetics7030067

Journal article

The landscape of tooth shape: Over 20 years of dental topography in primates

Berthaume, M., Lazzari, Vincent and Guy, Franck (2020). The landscape of tooth shape: Over 20 years of dental topography in primates. Evolutionary anthropology. 29 (5), pp. 245-262. https://doi.org/10.1002/evan.21856

Journal article

The importance of wavelength for tight temperature control during μ-laser-assisted machining

Dennis, Ashley, Goel, S., Al-Sayegh, Rajab and O’Neill, William (2020). The importance of wavelength for tight temperature control during μ-laser-assisted machining. Journal of Micromanufacturing. 4 (1), pp. 93-98. https://doi.org/10.1177/2516598420917866

Journal article

Optimizing Server Refresh Cycles: The Case for Circular Economy With an Aging Moore's Law

Bashroush, R., Rteil, N., Kenny, R. and Wynne, A. (2020). Optimizing Server Refresh Cycles: The Case for Circular Economy With an Aging Moore's Law. IEEE Transactions on Sustainable Computing. 7 (1), pp. 189 - 200. https://doi.org/10.1109/tsusc.2020.3035234

Journal article

Data-driven remote fault detection and diagnosis of HVAC terminal units using machine learning techniques

Dey, M. (2020). Data-driven remote fault detection and diagnosis of HVAC terminal units using machine learning techniques. PhD Thesis London South Bank University School of Engineering https://doi.org/10.18744/lsbu.9499w

PhD Thesis

Web-Based 3D Interactive Virtual Systems for Medical Instruments (AquaFlux and Epsilon)

Al Hashimi, O. (2020). Web-Based 3D Interactive Virtual Systems for Medical Instruments (AquaFlux and Epsilon). PhD Thesis London South Bank University School of Engineering https://doi.org/10.18744/lsbu.9498v

PhD Thesis

Nano-structured polymer-glass hybrid coatings

Iturraran Santiso, N. (2020). Nano-structured polymer-glass hybrid coatings. PhD Thesis London South Bank University School of Engineering https://doi.org/10.18744/lsbu.94904

PhD Thesis

Pre-chamber ignition system development for lean-burn Gasoline Direct Injection engine

Palakunnummal, M. (2020). Pre-chamber ignition system development for lean-burn Gasoline Direct Injection engine. PhD Thesis London South Bank University School of Engineering https://doi.org/10.18744/lsbu.94901

PhD Thesis

The impact of in-cylinder conditions on a turbocharged gasoline pre-chamber ignited engine

Sahu, P. (2020). The impact of in-cylinder conditions on a turbocharged gasoline pre-chamber ignited engine. PhD Thesis London South Bank University School of Engineering https://doi.org/10.18744/lsbu.948zx

PhD Thesis

Knee function through finite element analysis and the role of Miocene hominoids in our understanding of the origin of antipronograde behaviours: the Pierolapithecus catalaunicus patella as a case study

Pina, M., DeMiguel, D., Puigvert, F., Marcé‐Nogué, J. and Moyà‐Solà, S. (2020). Knee function through finite element analysis and the role of Miocene hominoids in our understanding of the origin of antipronograde behaviours: the Pierolapithecus catalaunicus patella as a case study. Palaeontology. 63 (3), pp. 459-475. https://doi.org/10.1111/pala.12466

Journal article

Developing a Circular Economy through remanufacturing Refrigerated Display Cabinets: An investigation into the behaviours of stakeholders in the UK Retail Refrigeration Sector

Muranko, Z. (2020). Developing a Circular Economy through remanufacturing Refrigerated Display Cabinets: An investigation into the behaviours of stakeholders in the UK Retail Refrigeration Sector. PhD Thesis London South Bank University School of Engineering https://doi.org/10.18744/lsbu.8zq3v

PhD Thesis

Properties of GMR based sensor for Magnetic field measurement at increasing Temperature Conditions

Sathappan, N., Tokhi, M., Duan, F., Zhao, Z., Kaur, A. and Shirkoohi, M. (2020). Properties of GMR based sensor for Magnetic field measurement at increasing Temperature Conditions. NDE 2020 India-Virtual Conference & Exhibition on Non-Destructive Evaluation. India 10 - 12 Dec 2020

Conference paper

Identifying Raman modes of Sb2Se3 and their symmetries using angle-resolved polarised Raman spectra

Fleck, N., Hobson, T. D. C., Savory, C. N., Buckeridge, J., Veal, T. D., Correia, M. R., Scanlon, D., Durose, K. and Jäckel, F. (2020). Identifying Raman modes of Sb2Se3 and their symmetries using angle-resolved polarised Raman spectra. Journal of Materials Chemistry A. 8, pp. 8337-8344. https://doi.org/10.1039/D0TA01783C

Journal article

Project SHOES: Secondary heat opportunities from electrical substations

Bowman, J., Revesz, A., Davies, G. and Maidment, G. (2020). Project SHOES: Secondary heat opportunities from electrical substations. ASHRAE 2020 Winter Conference. Orlando, Florida, USA 01 - 05 Feb 2020 American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).

Conference paper

Formic acid and methanol electro-oxidation and counter hydrogen production using nano high entropy catalyst

Kumar, N., Nellaiappan, S., Kumar, R., Malviya, K.D., Pradeep, K.G., Singh, A.K., Sharma, S., Tiwary, C.S. and Biswas, K. (2020). Formic acid and methanol electro-oxidation and counter hydrogen production using nano high entropy catalyst. Materials Today Energy. 16, p. 100393. https://doi.org//10.1016/j.mtener.2020.100393

Journal article

Integration of High Temperature Heat Networks with Low Carbon Ambient Loop Systems

Marques, C., Dunham, C., Jones, P., Matabuena, R., Revesz, A., Lagoeiro, H. and Maidment, G. (2020). Integration of High Temperature Heat Networks with Low Carbon Ambient Loop Systems. 2021 ASHRAE Winter Virtual Conference. Chicago 09 - 12 Feb 2021 American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).

Conference paper

Initial assessment of a 5th generation district energy network in central London

Revesz, A., De Almeida Marques, A., Davies, G., Matabuena, R., Jones, P., Dunham, C. and Maidment, G. (2020). Initial assessment of a 5th generation district energy network in central London. ASHRAE Transactions. 126, pp. 491-499.

Journal article

Assessing the performance of district heating networks utilising waste heat: A review

Lagoeiro, H, Revesz, A, Davies, G, Curry, D, Faulks, G, Murawa, M and Maidment, G (2020). Assessing the performance of district heating networks utilising waste heat: A review.

Conference paper

Multi-component (Ag–Au–Cu–Pd–Pt) alloy nanoparticle-decorated p-type 2D-molybdenum disulfide (MoS2) for enhanced hydrogen sensing

Urs, K.M.B., Katiyar, N.K., Kumar, R., Biswas, K., Singh, A.K., Tiwary, C.S. and Kamble, V. (2020). Multi-component (Ag–Au–Cu–Pd–Pt) alloy nanoparticle-decorated p-type 2D-molybdenum disulfide (MoS2) for enhanced hydrogen sensing. Nanoscale. 12 (22), pp. 11830-11841. https://doi.org/10.1039/d0nr02177f

Journal article

High-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization

Nellaiappan, S., Katiyar, N.K., Kumar, R., Parui, A., Malviya, K.D., Pradeep, K.G., Singh, A.K., Sharma, S., Tiwary, C.S. and Biswas, K. (2020). High-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization. ACS Catalysis. 10 (6), pp. 3658-3663. https://doi.org/10.1021/acscatal.9b04302

Journal article

A robot design for wind generator support structure inspection

Mondal, C. S. and Patricio L. C. M. (2020). A robot design for wind generator support structure inspection. CLAWAR 2020: 23rd International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines. Moscow, Russian Federation 24 - 26 Aug 2020 CLAWAR Association. https://doi.org/10.13180/clawar.2020.24-26.08.id#

Conference paper

A cylinder pressure-based knock detection method for pre-chamber ignition gasoline engine

Palakunnummal, M.F., Sahu, P., Ellis, M. and Nazha, M. (2020). A cylinder pressure-based knock detection method for pre-chamber ignition gasoline engine. SAE International Journal of Engines. 14 (3), pp. 405-417. https://doi.org/10.4271/03-14-03-0024

Journal article

Ice properties in ISO 19906's second edition

Hoyland, K, Kim, E, Marchenko, A, Lishman, B and Barrette, P (2020). Ice properties in ISO 19906's second edition. 25th IAHR International Symposium on Ice. Trondheim 23 - 27 Nov 2020 The International Association for Hydro-Environment Engineering and Research (IAHR).

Conference paper

Influence of vibrations on indentation and compression strength of sea ice

Lishman, B., Marchenko, A., Karulin, E., Frederking, R., Cole, D., Brown, J., Karulina, M., Sakharov, A., Chistyakov, P., Sodhi, D., Markov, V., Shortt, M. and Sliusarenko, A. (2020). Influence of vibrations on indentation and compression strength of sea ice. 25th IAHR International Symposium on Ice. Trondheim 23 - 27 Nov 2020 The International Association for Hydro-Environment Engineering and Research (IAHR).

Conference paper

Elasticity and viscosity of ice measured in the experiment on wave propagation below the ice in HSVA ice tank

Marchenko, A., Haase, A., Jensen, A., Lishman, B., Rabault, J., Evers, K., Shortt, M. and Thiel, T. (2020). Elasticity and viscosity of ice measured in the experiment on wave propagation below the ice in HSVA ice tank. 25th IAHR International Symposium on Ice. Trondheim 23 - 27 Nov 2020 The International Association for Hydro-Environment Engineering and Research (IAHR).

Conference paper

Elastic moduli of sea ice and lake ice calculated from in-situ and laboratory experiments

Marchenko, A., Grue, J., Karulin, E., Frederking, R., Lishman, B., Chistyakov, P., Karulina, M., Sodhi, D., Renshaw, C., Sakharov, A. and Morozov, E. (2020). Elastic moduli of sea ice and lake ice calculated from in-situ and laboratory experiments. 25th IAHR International Symposium on Ice. Trondheim 23 - 27 Nov 2020 The International Association for Hydro-Environment Engineering and Research (IAHR).

Conference paper

Understanding the market need for skills in alternative refrigerants with low global warming potential in the EU region - A comprehensive survey on Refrigerant Emissions And Leakage (REAL) alternatives programme

Paurine, A., Maidment, G., Rodway, M. and Yebiyo, M. (2020). Understanding the market need for skills in alternative refrigerants with low global warming potential in the EU region - A comprehensive survey on Refrigerant Emissions And Leakage (REAL) alternatives programme. International Journal of Refrigeration. https://doi.org/10.1016/j.ijrefrig.2020.11.014

Journal article

« Previous